期刊文献+

基于FPGA的宽带ADC采集系统的设计与实现 被引量:1

Design and implementation of a wideband ADC acquisition system based on FPGA
下载PDF
导出
摘要 针对宽带采集系统设计中的时钟抖动、高速ADC电路、高速数据缓存和高速数据传输等问题,阐述了一种基于FPGA为主控芯片、DDRII作为缓存模块、采样速率为500 MHz的宽带ADC数据采集系统的设计与实现。分析了各部分对采集系统的影响和在设计中需要注意的问题。对设计的系统进行了性能测试。 In view of the problems such as the clock jitter,high-speed ADC circuit,high-speed data buffer and data transmission in the design of the wideband acquisition system,a wideband ADC data acquisition system is designed and implemented,with the FPGA as the main control chip,the DDRII as the buffer module,and the sampling rate of 500 MHz. The effect of each part on the acquisition system and the significant problems in the design are analyzed,and the performance of the system designed is tested.
出处 《雷达与对抗》 2016年第4期41-44,共4页 Radar & ECM
关键词 雷达 信号处理 FPGA 采集系统 ADC radar signal processing FPGA acquisition system ADC
  • 相关文献

参考文献2

二级参考文献7

  • 1IEEE TC-10. IEEE Std.1241 Draft-Standard for Terminology and Test Methods for Analogy-to-Digital Converter[S]. Version VS022500,February 2000.
  • 2IEEE TC-10. IEEE Std.1054-94-IEEE Standard for Digitizing Waveform Recorders[S]. December 1994.
  • 3Jenq Y C. Measuring Harmonic Distortion and Noise Floor of an A/D Converter Using Spectral Averaging[J]. IEEE Trans. Instrum. Meas., 1988,37(4).
  • 4Clayton C, McClean J A,McClean G J. FFT Performance Testing of Data Acquisition System[J]. IEEE Trans. Instrum. Meas., 1986,IM-35(2).
  • 5Kuffel J, McComb T,Malewski.Comparative Evaluation of Computer Methods for Calculating the Best Fit Sinusoid to the High Purity Sine Wave[J]. IEEE Trans. on Instrumentation and Measurement, 1987,IM-36(2).
  • 6Simoes J B. Testing High-resolution Digitizers Using Conventional Signal Source[J]. Meas. Sci. Technol.,1998,9.
  • 7Simoes J B,et al. A New Method for Testing the Effective Number of Bits of Analog to Digital Converters[A]. IEEE Nuclear Science Symposium and Medical Imaging Conference, 1996.

共引文献33

同被引文献1

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部