摘要
Heterogeneous dynamical stress-strain response of Armco-Fe was investigated at high strain rates through the Split Hopkinson Pressure Bar (SHPB) testing. It was found that the viscoplastic deformation in BCC ferrite grains is affected by the strain rate. Thermal softening and variation in crystal orientations under high-strain-rate loading were used in the elastic-viscoplastic modeling. The micromechanical analysis with self-consistent transition and homogenization was used for estimation of the global impact response of the material. The results from modeling were found in good agreement with the experimental data.
Heterogeneous dynamical stress-strain response of Armco-Fe was investigated at high strain rates through the Split Hopkinson Pressure Bar (SHPB) testing. It was found that the viscoplastic deformation in BCC ferrite grains is affected by the strain rate. Thermal softening and variation in crystal orientations under high-strain-rate loading were used in the elastic-viscoplastic modeling. The micromechanical analysis with self-consistent transition and homogenization was used for estimation of the global impact response of the material. The results from modeling were found in good agreement with the experimental data.
基金
supported by the National Natural Science Foundation of China(Nos.11372201 and 11672196)