摘要
Using synchrotron X-ray imaging technique,the segregation evolution in solidifying Al-10 wt% Bi immiscible alloys was investigated at different cooling rates.Irrespective of the cooling rate,most of the Bi solute appeared at the upper part of the sample after solidification.The reason for this Bi enrichment phenomenon is different for different cooling rates.Besides Marangoni motion,positive segregation,which has rarely been noticed before,can also make Bi solute transfer to the hot top zone.It is also found that,bubbles（or pores） appear in solidifying Al-10 wt% Bi alloys,and the number of bubbles（or pores） increases with the increase of the cooling rate,while the size of the bubbles（or pores） decreases.
Using synchrotron X-ray imaging technique,the segregation evolution in solidifying Al-10 wt% Bi immiscible alloys was investigated at different cooling rates.Irrespective of the cooling rate,most of the Bi solute appeared at the upper part of the sample after solidification.The reason for this Bi enrichment phenomenon is different for different cooling rates.Besides Marangoni motion,positive segregation,which has rarely been noticed before,can also make Bi solute transfer to the hot top zone.It is also found that,bubbles（or pores） appear in solidifying Al-10 wt% Bi alloys,and the number of bubbles（or pores） increases with the increase of the cooling rate,while the size of the bubbles（or pores） decreases.
基金
financially supported by the National Natural Science Foundation of China(Nos.51027005,51271119 and51574165)
Shanghai Science&Technology Committee(No.11JC1405900)
