摘要
介绍了HP–3加氢催化剂和JX–4C脱硫催化剂的工作原理以及装填、干燥和预硫化。结果表明,HP–3加氢催化剂具有很强的有机硫加氢转化和烯烃加氢功能,转化率较高,操作弹性大;JX–4C脱硫催化剂具有较高的无机硫脱除精度。两者串联使用后,焦化干气中烯烃含量降至1%以内,总硫含量小于0.5 mg/m^3,达到了转化催化剂使用要求。
The reaction mechanisms of hydrogenation catalyst HP-3 and desulfurization catalyst JX-4C are described. The HP-3/JX-4 catalyst loading, drying, and presulfurization are also introduced. The results of the application show that the hydrogenation catalyst HP-3 has powerful function of organic sulfide hydrogenation conversion and olefin hydrogenation, with high conversion efficiency and wide operation range. The desulfurization catalyst JX-4C has high precision on removing inorganic sulfides. The hydrogenation catalyst HP-3, when applied in combination with the desulfurization catalyst JX-4C, can reduce the olefin in the coking gas below 1%(v), and the total sulfur below 0.5 mg/m^3, meeting the design requirements for the conversion catalyst.
作者
国玲玲
王国峰
Guo Lingling Wang Guofeng(Petrochemical Department, Liaoning Petrochemical Vocational and Technical College, Jinzhou Liaoning 121001, China Hydrocracking Plant, Jinxi Petrochemical Company, CNPC, Huludao Liaoning 125001, China)
出处
《石油石化绿色低碳》
2016年第6期15-18,36,共5页
Green Petroleum & Petrochemicals
关键词
焦化干气
制氢装置
加氢催化剂
脱硫催化剂
coking gas
hydrogen plant
hydrogenation catalyst
desulfurization catalyst