摘要
设计与制造协同作为并行工程的重要环节,是从设计阶段就开始考虑产品的可制造性,有效减少工艺准备时间,缩短研制周期及上市时间。但如何做到设计与制造有效协同一直是困扰航空制造行业的难题。在原有VPMWindchill-DELMIA协同研发的模式下,进一步探讨基于VPM与DELMIA直接开展设计制造高度并行的研发模式工程应用研究,为实现复杂产品设计制造的协同研发提供新的技术途径。采用VPM-DELMIA模式,可以提升设计与制造的最大并行程度,让制造部门可以及时了解设计状态,提早开展工艺设计过程。
As an important part of a parallel project, the design and manufacturing collaboration has thought about product manufacturability at the design stage, to reduce setup time and shorten the development cycle and time to market. But how to achieve effective collaborative design and manufacturing has been a trouble in aviation manufacturing industry. Using the original VPM-WindchilI-DELMIA collaborative research and development mode, based on VPM and DELMIA to further explore to conduct highly parallel direct R & D model applied research engineering design manufacturing, can provide new technical approach to achieve collaborative development of complex product design manufacturing. Using VPM-DELMIA mode, the maximum extent possible to enhance parallel of the design and manufacturing, so that the manu- facturing department can timely understand the design state, early conduct process planning.
出处
《航空制造技术》
2016年第23期137-141,共5页
Aeronautical Manufacturing Technology
关键词
并行工程
可制造性
协同
成熟度
Concurrent engineering
Manufacturability
Collaboration
Maturity level