期刊文献+

加速度反馈技术在惯性稳定平台中的应用 被引量:4

Application of Acceleration Feedback Techniques on Inertial Stabilization Platform
下载PDF
导出
摘要 惯性稳定平台在运行过程中会受到内部和外部因素的影响,这些因素的变化引起被控对象的参数变化,进而降低系统的控制精度。本文提出在惯性稳定平台的速度回路内增加高增益的加速度闭环校正,可以很好地补偿被控对象参数变化的不利影响。并且由于加速度计为惯性敏感元件,加速度内回路还具有扰动抑制能力,惯性稳定平台的主动抑制能力等于加速度回路和速度回路抑制能力之和。实验证明,加速度反馈闭环增强了惯性稳定平台的主动抑制能力。 The performance of the inertial stabilized platform will be affected heavily by inner or outer factors, which will change the transfer characteristic of the inertial stabilized platform and result in the degradation of the precision of the system. Therefore, the high-gain acceleration feedback will be inserted in the velocity feedback loop to compensate the change of these factors. And the acceleration feedback loop can stabilize the platform because that the accelerometers are inertial sensors, the active disturbance suppression of the platform is the product of the error attenuation of the acceleration loop and the velocity loop. Extensive experimental results show that the acceleration feedback can enhance the active disturbance suppression of the platform.
出处 《光电工程》 CAS CSCD 北大核心 2016年第12期40-45,共6页 Opto-Electronic Engineering
基金 中国科学院重点实验室基金资助项目
关键词 惯性稳定平台 加速度计 加速度反馈 主动抑制能力 inertial stabilized platform accelerometer acceleration feedback active disturbance suppression
  • 相关文献

参考文献3

二级参考文献20

  • 1李文魁,王俊璞,金志华,田蔚风.直升机机载光电吊舱的发展现状及对策[J].中国惯性技术学报,2004,12(5):75-80. 被引量:37
  • 2黄永梅,张桐,马佳光,付承毓.高精度跟踪控制系统中电流环控制技术研究[J].光电工程,2005,32(1):16-19. 被引量:26
  • 3许江宁,朱涛,卞鸿巍.航空摄影陀螺稳定平台[J].仪器仪表学报,2007,28(5):914-917. 被引量:19
  • 4Barnes F N. Stable Member Equations of Motion for a Three-Axis Gyro Stabilized Platform [J]. Aerospace and Electronics System(S0018-9251), 1971, AES-7(5): 830-842.
  • 5Sullivan G L, Stabilization of Undamped Gyro Platforms Using an Inertial Angular Rate Sensor [J]. Aerospace and Navigational EleetronicsSystem(S0096-1957), 1964, 11(4): 266-271.
  • 6George Ellis,R.D.Lorenz.Resonant Load Control Methods for Industrial Servo Drives[A].IEEE Industry Applications Society Annual meeting[C].Rome,Italy:IEEE,2000:1438-1455.
  • 7George Ellis,Gao Zhiqiang.Cures for Low-Frequency Mechanical Resonance in Industrial Servo Systems[A].Industry Applications Conference,2001.Thirty-Sixth IAS Annual Meeting.Conference Record of the 2001 IEEE[C].Chicago,IL,USA:IEEE,2001,1:252-258.
  • 8George W.Younkin.Compensating Structural Dynamics for Servo Driven Industrial Machines with Acceleration Feedback[A].Industry Applications Conference,2004.39th IAS Annual Meeting[C].[S.L.]:IEEE,2004,3:1881-1890.
  • 9Yu Nakayama,Kiyoshi Fujikawa,Hirokazu Kobayashi.A torque control method for three-inertia torsional system with backlash[A].Advanced Motion Control,2000.Proceedings.6th International Workshop on[C].Nagoya,Japan:IEEE,2000:193-198.
  • 10Mancini D,Brescia M,Schipani P.Ground-based telescope pointing and tracking optimization using a neural controller[J].Neural Networks,2003,16(3/4):365-374.

共引文献170

同被引文献32

引证文献4

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部