摘要
对前臂皮肤黏弹性属性的了解有助于临床康复产品设计。基于动态微印压方法,对6位男性志愿者前臂皮肤进行了测量,最大压入位移为100μm,频率范围为5~30 Hz。前臂皮肤的平均接触刚度和平均接触阻尼系数分别为(165.02±9.40)N/m、(0.22±0.047)Ns/m,平均储能模量为(41.25±2.35)k Pa,平均损耗模量为5.37±2.83 k Pa,平均复模量值为41.59 k Pa。结果表明前臂皮肤层的黏弹性属性采用Kelvin线性黏弹性模型描述具有一定合理性。
Knowledge of viscoelastic properties of the forearm skin can help the design of clinical rehabilitation products. Based on dynamic micro indentation method,6 male volunteers were enrolled to measure their forearm skin,the maximum indentation displacement was set as 100 μm,the indentation frequency range was from 5 to 30 Hz with 5 Hz increment. Results shows that the average contact stiffness and average contact damping coefficient were( 165. 02 ± 9. 40) N / m and( 0. 22 ± 0. 047) N·s / m,respectively. The average storage modulus and the loss modulus were( 41. 25 ± 2. 35) k Pa and( 5. 37 ± 2. 83) k Pa,respectively,so the average complex modulus was41. 59 k Pa. It was concluded that the Kelvin linear viscoelastic model could help to describe the properties of human forearm skin layers.
作者
王恒
桑元俊
WANG Heng SANG Yuan-jun(Jincheng College, Nanjing University of Aeronautics and Astronautics1 , Nanjing 211156, P. R. China School of Mechanical Engineering2 , Shanghai Jiaotong University, Shanghai 200240, P. R. China)
出处
《科学技术与工程》
北大核心
2017年第3期164-168,共5页
Science Technology and Engineering
基金
国家自然科学基金(51205250)资助
关键词
动态微印压
前臂皮肤
接触刚度
黏弹性
dynamic micro indentation
forearm skin
contact stiffness
viscoelasticity