Numerical analysis and experimental investigation of modalproperties for the gearbox in wind turbine
被引量：2
参考文献3
1 薛强,李顺德,冯广斌.试验台齿轮箱系统耦合振动有限元模态分析[J] .机械传动,2010,34(9):65-68. 被引量：11
2 魏秀业,潘宏侠,黄晋英.基于模态测试与分析的齿轮箱测点优化[J] .应用科技,2010,37(6):1-4. 被引量：10
3 Pengxing YI Lijian DONG Tielin SHI.Multi-objective genetic algorithms based structural optimization and experimental investigation of the planet carrier in wind turbine gearbox[J] .Frontiers of Mechanical Engineering,2014,9(4):354-367. 被引量：4
二级参考文献9
1 敖庆章,程广利.齿轮箱模态测试与分析[J] .舰船科学技术,2005,27(6):88-90. 被引量：8
2 CHERNG AN-PAN.Optimal sensor placement for modal parameter identification using signal subspace correlation techniques[J].Mechanical Systems and Signal Processing,2003,17(2):36-378.
3 PAPADIMITRIOU C.Optimal sensor placement methodology for parametric identification of structural systems[J].Journal of Sound and Vibration,2004,278:923-947.
4 BHUSHAN M,RENGASWAMY R.Design of sensor location based on various fault diagnostic observability and reliability criteria[J].Computers and Chemical Engineering,2000,24:735-741.
5 WORDEN K,BURROWS A P.Optimal sensor placement for fault detection[J].Engineering Structures,2001,23:885-901.
6 WANG Haiqing,SONG Zhihuan,WANG Hui.Statistical process monitoring using improved PCA with optimized sensor locations[J].Journal of Process Control,2002,12:735-744.
7 LIU Wei,GAO Weicheng,SUN Yi,et al.Optimal sensor placement for spatial lattice structure based on genetic algorithms[J].Joural of Sound and Viberation,2008,317(5):175-189.
8 Mohanmed Slim Abbes,Slim Bouaziz,Fakher Chaari,et al.An acoustic structural interaction modeling for the evaluation of a gearbox radiated noise[J].International Journal of Mechanical Sciences,2008(50):79-81.
9 王刚,郭茂林.航天航空滚动轴承刚度[J] .哈尔滨工业大学学报,2001,33(5):644-645. 被引量：26
共引文献22
1 华剑,夏迪.压下减速器壳体的模态分析及结构动力修改[J] .煤矿机械,2012,33(12):103-105. 被引量：4
2 王佳,潘宏侠,杨晓波.基于PolyMAX法的齿轮箱试验模态分析[J] .机械传动,2013,37(2):66-69. 被引量：20
3 陈珊珊,陈亮亮.基于Workbench齿轮箱系统固有特性分析[J] .煤矿机械,2013,34(3):122-124. 被引量：6
4 王志军,崔云鹏.某高射机枪的有限元和实验模态分析[J] .机械管理开发,2013,28(2):1-2. 被引量：1
5 张睿,黄晋英,张永梅,王佳,张文栋.OMA和QICA技术在齿轮箱故障诊断中的应用[J] .机械传动,2014,38(1):87-91.
6 刘辉,潘宏侠.基于PolyMAX方法的齿轮箱计算模态与实验模态对比分析[J] .煤矿机械,2014,35(1):67-70. 被引量：5
7 卢黎明,秦豫江,蔡颖.基于ABAQUS的滚滑轴承模态分析[J] .机械传动,2014,38(7):111-114. 被引量：7
8 罗朝阳,马维金,张纪平,葛玉珉.某轻卡变速箱耦合系统的动态特性研究[J] .机械传动,2014,38(8):111-114.
9 罗朝阳,马维金,张纪平,葛玉珉.某轻卡齿轮箱动态特性仿真与试验研究[J] .机械强度,2014,36(5):739-744. 被引量：1
10 张睿,何常德,薛晨阳,张文栋.QICA在齿轮箱工作模态识别和故障诊断中的应用[J] .机械设计与制造,2015(1):256-260. 被引量：2
同被引文献11
1 刘忠明,段守敏,王长路.风力发电齿轮箱设计制造技术的发展与展望[J] .机械传动,2006,30(6):1-6. 被引量：58
2 秦大同,邢子坤,王建宏.基于动力学和可靠性的风力发电齿轮传动系统参数优化设计[J] .机械工程学报,2008,44(7):24-31. 被引量：103
3 张志宏,刘忠明,张和平,阳培.大型风电齿轮箱行星架结构分析及优化[J] .机械设计,2008,25(9):54-56. 被引量：33
4 朱才朝,徐向阳,陆波,宋朝省.大功率船用齿轮箱传动系统模糊可靠性优化[J] .船舶力学,2010,14(8):915-921. 被引量：6
5 秦大同,周志刚,杨军,陈会涛.随机风载作用下风力发电机齿轮传动系统动态可靠性分析[J] .机械工程学报,2012,48(3):1-8. 被引量：54
6 丁显,刘瑞华,滕伟.风电机组齿轮箱行星架疲劳寿命分析[J] .可再生能源,2013,31(3):46-50. 被引量：5
7 Pengxing YI Lijian DONG Tielin SHI.Multi-objective genetic algorithms based structural optimization and experimental investigation of the planet carrier in wind turbine gearbox[J] .Frontiers of Mechanical Engineering,2014,9(4):354-367. 被引量：4
8 孙黎,石鹏飞,代海涛,董礼,刘同民.风电齿轮箱低速级行星架极限强度分析[J] .机械制造,2017,55(8):43-46. 被引量：9
9 林小燕,魏静,赖育彬,秦大同,张爱强,汝学斌.齿轮的剩余强度模型及其动态可靠度[J] .哈尔滨工程大学学报,2017,38(9):1476-1483. 被引量：9
10 呼斯乐图,段富海,来进勇,安玮.EMA行星架多目标优化与疲劳可靠性分析[J] .机电工程技术,2018,47(1):41-47. 被引量：4
引证文献2
1 Genshen LIU,Huaiju LIU,Caichao ZHU,Tianyu MAO,Gang HU.Design optimization of a wind turbine gear transmission based on fatigue reliability sensitivity[J] .Frontiers of Mechanical Engineering,2021,16(1):61-79. 被引量：7
2 雷林,丁明泽,胡洪伟,张敏,侯怡鑫.基于响应曲面法风电齿轮箱行星架拓扑优化设计[J] .重庆交通大学学报（自然科学版）,2022,41(1):143-148.
二级引证文献7
1 刘怀举,张博宇,朱才朝,魏沛堂.齿轮接触疲劳理论研究进展[J] .机械工程学报,2022,58(3):95-120. 被引量：24
2 鲁文佳,黄伟波,朱丽莎.采煤机截割传动系统灵敏度分析与动态优化设计[J] .矿山机械,2023,51(7):55-62.
3 路志成,周建星,崔权维,温建民,费翔.基于动力学的风力机齿轮传动系统可靠性研究[J] .太阳能学报,2023,44(9):397-404.
4 刘桂源,张磊,魏沛堂,刘根伸,胡明珠,何志强,刘怀举.同向平双齿轮传动系统设计分析软件开发[J] .机械传动,2024,48(1):52-60.
5 李峥琪,刘长钊,宋健,王磊.提高年循环效率的永磁同步发电机-齿轮传动系统机电协同设计[J] .机械工程学报,2024,60(1):296-308.
6 Xue-Qin Li,Lu-Kai Song.Random Forest-Based Fatigue Reliability-Based Design Optimization for Aeroengine Structures[J] .Computer Modeling in Engineering & Sciences,2024,140(7):665-684.
7 王保民,闫瑞翔,房文博,赵瑞平,刘洪芹.基于遗传算法的风电齿轮传动系统参数优化设计[J] .兰州理工大学学报,2024,50(2):31-35.
1 LIU Wen LIN Teng-jiao LI Run-fang DU Xue-song.Finite element analysis of dynamic response and structure borne noise of gearbox[J] .Journal of Chongqing University,2007,6(2):119-124. 被引量：4
2 Samroeng Netpu Panya Srichandr.Failure Analysis of a Helical Gear in a Gearbox Used in a Steel Rolling Mill[J] .材料科学与工程（中英文B版）,2012,2(4):289-294.
3 Xie Liyang,Lin Wenqiang,Liu Jianzhong,(Northeastern University).FATIGUE RELIABILITY DESIGN AND ESTIMATION METHOD FOR VARIABLE LOADING[J] .Chinese Journal of Mechanical Engineering,1995,8(3):244-247.
4 傅勤毅,王峰林,夏松波,彭玉才.Application of Short Fourier-Transform in Detection of Early Fault Rolling-Element Bearing[J] .Journal of Harbin Institute of Technology(New Series),1998,5(3):86-89.
5 忠于市场 精于创新——新品闪耀美国租赁展,JLG开启2015精进之年[J] .设备管理与维修,2015(5):8-8.
6 龙勇云,吴汉阁,叶石华.基于Workbench的弧面凸轮机构模态分析[J] .中国机械,2014,0(14):16-16.
7 Tobias Schulze.Valuable Impulses and Successful Models of Gearbox Development from Practice[J] .Journal of Mechanics Engineering and Automation,2016,6(8):408-418.
8 Zhang Jingmin,Li Yujuan,Chen Sheping (Northeastern University).MODAL ANALYSIS OF A CHASSIS FRAME OF A HEAVY LECTRA HAUL[J] .Chinese Journal of Mechanical Engineering,1996,9(4):337-340.
9 胡瑾,孟文俊.基于ANSYS Workbench带式输送机滚筒动力学分析[J] .机械工程师,2015(9):49-51. 被引量：7
10 Zhang Qing,Liu Youwu,Fan Jinwei,Wang Shuxin,Wang Xiaoshong,Wu Jianhua (Tianjin University).METHOD OF ENHANCING THE POSITIONING ACCURACY FOR NC MACHINE TOOLS[J] .Chinese Journal of Mechanical Engineering,1996,9(4):292-299. 被引量：3
