摘要
丁苯橡胶生产废水具有环状有机物多且成分复杂、可生化性差、高难降解性等特点。采用催化氧化/MBR/臭氧组合工艺处理某丁苯橡胶生产企业废水,运行结果表明,该工艺运行稳定,出水水质可达到天津市《污水综合排放标准》(DB 12/356—2008)的二级标准。
Styrene butadiene rubber production wastewater is characterized by many cyclic organic compounds with complex composition, poor biodegradability and so on. The combined process of catalytic oxidation, MBR and ozonation was used to treat this wastewater. The operation results showed that the combined process was operated steadily, and the effluent quality could meet the second level criteria specified in the Integrated Wastewater Discharge Standard （DB 12/356 -2008 ） for Tianjin City.
出处
《中国给水排水》
CAS
CSCD
北大核心
2017年第2期87-89,95,共4页
China Water & Wastewater
关键词
丁苯橡胶废水
MBR
臭氧
高效填料
media styrene butadiene rubber production wastewater
MBR
ozonation
efficient
