期刊文献+

塑料合金防腐蚀复合管监造过程中的技术控制要点 被引量:1

Key Points for Supervising Anticorrosion Plastic Alloy Composite Plpe
下载PDF
导出
摘要 塑料合金防腐蚀复合管是将热塑性塑料合金、热固性树脂和金属3种材料有机结合,采用金属活接头连接,改善了金属管道耐腐蚀、耐压蚀的缺点。基于塑料合金防腐蚀复合管的结构特点,文章对某管材厂生产塑料合金防腐蚀复合管驻厂监造过程中存在的质量问题和注意事项进行分析和总结,详细论述监造过程中的技术控制要点,结合驻厂监造工作实践对常见的质量问题提出解决方案。 Anticorrosion plastic alloy composite pipe is available when thermosetting plastic alloy,thermosetting resin and metallic material are properly combined.The pipes are connected with metal unions.The pipe has the advantages of corrosion resistance and pressure resistance.In light of the structural nature of the pipe,this paper analyzes the main quality problems found during manufacturing supervision.By summing up the experience,the author elaborates the key points of technical control for supervising the making of the pipes and puts forward solutions for common quality problems.
出处 《设备监理》 2017年第1期48-51,共4页 Plant Engineering Consultants
关键词 塑料合金防腐蚀复合管 设备监理 技术控制 纤维缠绕工艺 anticorrosion plastic alloy composite pipe equipment supervision technical control filament winding process
  • 相关文献

参考文献5

二级参考文献22

  • 1王长杰.塑料合金复合管应用于注水管线[J].油气田地面工程,2006,25(6):60-60. 被引量:4
  • 2唐杰.旋转滚塑成型钢塑耐蚀复合管[J].腐蚀与防护,1997,18(1):24-24. 被引量:1
  • 3SY/T 6266-2004 低压玻璃纤维管线管和管件.
  • 4SY/T 6267-2006 高压玻璃纤维管线管规范.
  • 5SY/T 6716-2008 石油天然气工业用柔性复合高压输送管.
  • 6API RP 15S-06 Qualification of Spoolable Reinforced Plastic Line Pipe.
  • 7HG/T 4087-2009 塑料合金防腐蚀复合管.
  • 8GB/T 5351-2005 纤维增强热固性塑料短时水压失效压力试验方法.
  • 9ASTM D 1599-99(Reapproved 2005) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe,Tubing,and Fittings.
  • 10ASTM D 2992-06 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings.

共引文献23

同被引文献6

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部