Moldflow在安全帽注塑成型工艺设计中的应用

The Application of Moldflow in Injection Molding of the Helmet

随着高分子材料的发展,注塑产品的应用范围越来越广泛,这对注塑成型工艺要求也越来越高,尤其是注塑成型薄壁、曲面、强度等要求较高的产品,除了保证其使用要求外还需要其美观。安全帽质量的好坏直接关系到工地员工的生命。因此,针对合理的注塑成型工艺在安全帽制品成型中的重要性,利用Moldflow软件,通过调整注射时间、熔料温度、模具温度、保压压力等注塑工艺参数来制定恰当成型工艺的方法,从而获得最佳成型工艺参数,进而保证安全帽的质量。

With the development of polymer materials,application scope and injection molding products more widely,the increasingly high requirements of injection molding technology,especially injection molding,surface strength,higher requirements of products,in addition to ensure the requirements also need its appearance. The quality of the safety helmet is directly related to the life of the workers in the field. Therefore,in view of the importance of injection molding products in reasonable safety cap molding,using the Moldflow software,by adjusting the injection time,melt temperature,mold temperature,maintaining appropriate and molding pressure of injection molding process parameters to the method,the best process parameters,and ensure quality and safety cap.