期刊文献+

电流模式控制零电压软开关弧焊逆变器 被引量:3

A Study on Zero-Voltage Switch Inverter with Current Mode Control for Arc Welding Inverter
下载PDF
导出
摘要 采用具有电流模式的UC3879移相控制芯片 ,研究了一种新型全桥软开关电路的拓扑结构。研究了电流模式移相控制下的驱动电路、过流检测电路和主电路变压器输出波形特点。结合大功率弧焊逆变器的设计 ,分析了领先桥臂和滞后桥臂实现零电压软开关的条件。试验表明 ,无论占空比为何值 ,当功率变压器初级电压为零时 ,初级电流基本维持最大值不变 ;领先桥臂中点电压变换期间 ,变压器初级电流基本保持最大值 ,使得领先桥臂容易实现软开关 ;由于激磁电感参与了滞后桥臂换流 。 A topological circuit with full bridge soft switching is developed by adopting phase-shift chip UC3879 with current mode and phase-shift control. The output waveform characteristics of driving circuit, detecting over-current port and main circuit transformer have been researched by practical experiment. Furthermore, based on the designing of a large power inverter for arc welding, the soft-switching conditions of leading and lagging legs have been analyzed. The following conclusions have been achieved by experiments. No matter what value of the duty is, the primary current of power transformer keeps the maximum value when its primary voltage equals zero. In the midpoint voltage of leading leg transition, its soft-switching is easily realized because of the primary current of transformer keeping the maximum. Two pieces of IGBT of lagging leg also achieve soft-switching due to the magnetizing inductance participating in the transition of lagging leg.
出处 《焊接学报》 EI CAS CSCD 北大核心 2002年第4期35-36,40,共3页 Transactions of The China Welding Institution
基金 广东省自然科学基金资助项目 (0 0 0 380 )
关键词 电流模式 零电压软开关 弧焊逆变器 Bridge circuits Electric arc welding Electric transformers Pulse width modulation Switching circuits
  • 引文网络
  • 相关文献

参考文献3

  • 1[1]Cho J G,Sabate J A,Hua G C,et al.Zero-voltage and zero-current-switching full bridge converter for high power applications[J].IEEE Transactions on Power Electronics,1996,11(4):622~627.
  • 2[2]Hua Guichao,Lee Fred C,Jovanovic Milan M.An improved full bridge zero-voltage-switched PWM converter using a saturable inductor[J].IEEE Transactions on Power Electron,1993,8(4):530~534.
  • 3[3]Cho Jung-goo,Baek Ju-won,Jeong Chang-yong,et al.Novel zero-voltage and zero-current-switching full-bridge PWM converter using a simple auxiliary circuit[J].IEEE Transactions on Industry Applications,1999,35(1):15~20.

同被引文献18

  • 1鞠志忠,童可明.大功率软开关移相全桥变换器的研究[J].电源技术应用,2005,8(6):17-20. 被引量:2
  • 2张永锋,黄自龙,杨旭,王兆安.12kW移相全桥PWM变换器的设计[J].电力电子技术,2006,40(4):50-52. 被引量:10
  • 3Cho J ung-goo, Baek J u-won ,Jeong Chang-yong, et al. Novel zero-voltage and zero-current-switching full-bridge PWM converter using a simple auxiliary circuit. IEEE Transactions on Industry Applications ,1999,35 (1) :15~20.
  • 4林一松.[D].华南理工大学,2002.
  • 5陈强 孙振国.弧焊技术的发展现状[A]..高效化焊接方法、设备、材料的理论与应用研讨会论文集[C].,2002..
  • 6Zhou I.inquan, Ruan Xinbo. Soft - switching PWM Boost Full - bridge Converter[J].Journal of Southeast University, 2003,19(3) :250 - 255.
  • 7张占松 蔡宣三.开关电源的原理与设计[M].北京:电子工业出版社,1999..
  • 8Cho J G,Sabatk J A,Hua G C,et al.Zero-voltage and zero-current-switching full bridge PWM converter for high-power applications[J].IEEE Transactions on Power Electronics,1996,11(4):622-628.
  • 9Koo G B.New zero-voltage-switching phase-shift full-bridge converter with low conduction losses[J].IEEE Transactions on Industrial Electronics,2005,52(1):228-235.
  • 10Kutkut N H,Divan D M,Gascoigne R W.An improved full-bridge zero-voltage switching PWM converter using a two-inductor rectifier[J].IEEE Transactions on Industry Applications,1995,31(1):119-126.

引证文献3

二级引证文献11

;
使用帮助 返回顶部