期刊文献+

Effects of Process Parameters of Semisolid Stirring on Microstructure of Mg–3Sn–1Mn–3SiC(wt%) Strip Processed by Rheo-rolling 被引量:5

Effects of Process Parameters of Semisolid Stirring on Microstructure of Mg–3Sn–1Mn–3SiC(wt%) Strip Processed by Rheo-rolling
原文传递
导出
摘要 A novel semisolid stirring and rheo-rolling process for preparing Mg-3Sn-1Mn-3SiC (wt%) composite strips was proposed, and the effects of process parameters of semisolid stirring on microstructures of Mg-3Sn-1Mn-3SiC (wt%) composite strips were investigated. The average grain size and roundness decrease, and the distribution of SiC becomes more homogeneous with the decrease in stirring temperature and the increase in the stirring speed. When the stirring time is increased, the distribution of SiC particles tends to be homogeneous, and the average grain diameter and roundness of α- Mg grain decrease. Under the following process parameters: the stirring temperature at 640 ℃, the stirring speed at 1100 rpm, the stirring time at 30 min and the roll speed at 0.2 m/s, Mg-3Sn-1Mn-3SiC (wt%) strip with a cross-sectional size of 4 mm × 160 mm was prepared. The ultimate tensile strength and elongation of Mg-3Sn-1Mn-3SiC (wt%) composite strip reached 226 ± 6 MPa and (7.4 ± 0.2)%, which are obviously improved in comparison with Mg-3Sn-1Mn (wt%). A novel semisolid stirring and rheo-rolling process for preparing Mg-3Sn-1Mn-3SiC (wt%) composite strips was proposed, and the effects of process parameters of semisolid stirring on microstructures of Mg-3Sn-1Mn-3SiC (wt%) composite strips were investigated. The average grain size and roundness decrease, and the distribution of SiC becomes more homogeneous with the decrease in stirring temperature and the increase in the stirring speed. When the stirring time is increased, the distribution of SiC particles tends to be homogeneous, and the average grain diameter and roundness of α- Mg grain decrease. Under the following process parameters: the stirring temperature at 640 ℃, the stirring speed at 1100 rpm, the stirring time at 30 min and the roll speed at 0.2 m/s, Mg-3Sn-1Mn-3SiC (wt%) strip with a cross-sectional size of 4 mm × 160 mm was prepared. The ultimate tensile strength and elongation of Mg-3Sn-1Mn-3SiC (wt%) composite strip reached 226 ± 6 MPa and (7.4 ± 0.2)%, which are obviously improved in comparison with Mg-3Sn-1Mn (wt%).
出处 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2017年第1期66-72,共7页 金属学报(英文版)
基金 financially supported by The National Natural Science Foundation of China (Nos. 51604246 and 51674077) Shanxi Province Science Foundation for Youths
关键词 Mg-matrix composite Rheo-rolling MICROSTRUCTURE Property Mg-matrix composite Rheo-rolling Microstructure Property
  • 相关文献

同被引文献69

引证文献5

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部