摘要
探讨了热熔胶种类、涂胶温度、封边压力、封边高度等因素对浸渍胶膜纸饰面刨花板PVC封边耐水蒸气性能的影响。结果表明,这些因子对封边质量影响显著。使用PVC封边带封边时,推荐涂胶温度200~210℃、压力0.4~0.6 MPa,封边带高度略高于板件侧边。
The effects of hot-melt adhesive, coating temperature, banding pressure and banding height on edge banding performance of wood-based panel furniture were investigated. The results indicated the~ thctors significantly affected edge banding performance. The recommend banding parameters using PVC edge banding was as follows: coating temperature 200 - 210 ℃, pressure 0.4 - 0.6 MPa, and retaining edgeband should be slightly higher than the side of panel reserved.
出处
《中国人造板》
2017年第3期7-10,共4页
China Wood-Based Panels
关键词
耐水蒸气性能
热熔胶
涂胶温度
封边压力
water vapor resistance: hot-melt adhesive
coating temperature
banding pressure