摘要
该文介绍了多功能空气源热泵实验系统的工作原理,进行了实验室空调冷负荷及热水量的计算,并对实验测试系统进行了设计。通过本文实验方法,得出了多功能空气源热泵在不同运行模式下机组运行功率、制冷量和COP值。多功能空气源热泵机组制热性能系数和制冷系数分别为3.84和3.25。该实验测试结果表明多功能空气源热泵实验系统设计是可行的。
This paper introduces the working principle of multifunctional air source heat pump experimental system, carries out the calculation of the cooling load and the amount of hot water of the laboratory air condition, and designs the experimental test sys- tem. Through the experimental method, the power, cooling capacity and COP of multifunetional air souce heat pump under different op- eration mode are obtained. The coefficient of thermal performance and refrigeration performance of the unit are 3.84 and 3. 25, respec- tively. The experimental results show that the multi -functional air source heat pump experimental system design is feasible.
出处
《实验科学与技术》
2017年第1期43-45,共3页
Experiment Science and Technology
基金
上海工程技术大学2014大学生创新项目
关键词
多功能空气源热泵系统
制冷量
性能系数
冷负荷
muhifunctional air source heat pump system, refrigerating capacity, coefficient of performance, cooling load
