摘要
根据面齿轮专用磨齿机的机械结构,提出了偏置曲线修整方法,设计了砂轮修整装置,并运用VERICUT软件进行修整加工仿真.推导了含各类修整误差情况下面齿轮的齿面方程表达式,并运用MATLAB软件生成了齿面误差云图,为修整过程的误差补偿提供了理论参考.最后进行了磨削及检测试验,将检测结果与误差云图对比,分析可能产生这种误差的原因,并在修整过程中进行误差补偿,使齿面最大法向误差值减少了31.14%,面齿轮齿形精度得到了提高.
According to the mechanical structure of a face gear grinding machine,an offset curve dressing method and a grinding wheel dresser were designed,and simulation and analysis of the dressing process were performed with VERICUT.The equation of face-gear tooth profile with error caused by wheel dressing process was derived and the error cloud of face-gear tooth profile was created with MATLAB,providing theory references for the research on error compensation of dressing process.The grinding and testing experiments were carried out at last.By comparing the result with the error cloud,the reason was analyzed and the error in the dressing process was compensated;the maximum tooth profile normal error was reduced by 31.14%,and the precision of the tooth surface was improved.
作者
王延忠
钟扬
侯良威
兰州
赵洪铺
WANG Yan-zhong ZHONG Yang HOU Liang-wei LAN Zhou ZHAO Hong-pu(School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China)
出处
《航空动力学报》
EI
CAS
CSCD
北大核心
2017年第1期120-129,共10页
Journal of Aerospace Power
基金
预研基金重点项目(9140A18020113HX)
预研项目(5130802X
5131812X)
关键词
面齿轮
渐开线
砂轮修整
误差分析
误差补偿
face gear
involute
wheel dressing
error analysis
error compensation