摘要
本文研究了养护制度、聚合物掺量对苯丙乳液改性混凝土抗氯离子渗透深度以及其微观结构的影响。结果表明,与28d标养相比,7d标养、21d室温养护,改性混凝土的抗氯离子渗透性能更好;随着聚合物掺量增加显著改善了改性混凝土中界面过渡区结构,并在水泥基体中形成了连续的三维网状结构,从而显著降低改性混凝土氯离子渗透深度,当聚合物掺量为7%时改性混凝土氯离子渗透深度较对比样降低了66.1%。
In this paper, the effect of curing system and polymer content on resistance to chloride ion penetration property and microstructure of styrene acrylic emulsion modified concrete were researched.The results indicate that in comparison with 28d standard curing,using 7d standard curing and 21d room temperature curing,the resistance to chloride ion penetration property of modified concrete is better.With the polymer content increased, the interface transition zone structure of modified concrete was significantly improved, and form a continuous three-dimensional network structure in the cement matrix,thus the chloride ion penetration depth of modified concrete was significantly reduced.When the polymer content of modified concrete is 7%, the chloride ion penetration depth was reduced by 66.1%.
作者
刘刚
刘悦
程大磊
LIU Gang LIU Yue CHENG Dalei(Institute of Building Materials and Energy Testing,Architectural Science Research and Design Institute of Jilin Province, Changchun, China 130011)
出处
《北方建筑》
2016年第2期25-27,共3页
Northern Architecture
关键词
苯丙乳液
聚合物改性混凝土
氯离子渗透
styrene acrylic emulsion
polymer modified concrete
chloride ion penetration