期刊文献+

TC4-DT钛合金材料动态力学性能及其本构模型 被引量:9

Dynamic Mechanics Behavior and Constitutive Model of TC4-DT Titanium Alloy Materials
下载PDF
导出
摘要 利用同步组装的高温分离式Hopkinson压杆试验装置,对TC4-DT钛合金材料分别进行了常温下不同应变率(930~9700s-1)和应变率为5000s-1时不同温度下(20~800℃)的动态力学性能测试,获得了各种冲击载荷下的应力-应变曲线。试验数据表明,TC4-DT材料具有应变率增塑效应且存在着临界应变率值,当应变率高于此值时应变率敏感性增强明显,此外随着材料加热温度的升高,软化效应减弱。利用试验所得的数据拟合了基于Power-Law和Johnson-Cook两种热-黏塑性本构方程且获得这两种动态本构模型参数,并将所得的两种拟合曲线与试验所得数据进行对比分析,结果表明两曲线吻合度都较好,此外还对这两种曲线的拟合精度进行对比,对比结果表明两种模型的拟合误差相差不大,但是Power-Law模型拟合精度要略优于Johnson-Cook模型的拟合精度。 The dynamic mechanics behavior experiments of TC4 -DT titanium alloy materials were carried out using high temperature Hopkinson bar with synchro assembly system SHPB apparatus un- der different strain rates (930-9700 s^-1) and at room temperature and under different temperature (20-800℃ ) at high strain rate(5000 s^-1 )respectively.The stress- strain curves of TC4 -DT titanium materials were obtained at high temperatures and high strain rates. The TC4 -DT materials have the strain rate plasticity effect and have the critical strain rate value, above this value, the strain rate sen- sitivity increases obviously. The softening effect is weakened with the increase of heating temperature of the materials. The experimental data were fitted Power - Law and Johnson - Cook two kinds of thermal visco - plastic constitutive equation respectively; and the two kinds of dynamic constitutive model parameters were obtained, the two kinds of fitting curves and the experimental data obtained were compared and analyzed. The results show that the two model predictions have a good agreement with the experimental data. Futher,the fitting precision of the two curves were compared and results show that the fitting errors of the two models are not very different, but the precision of the Power- Law model is slightly better than that of Johnson - Cook model.
作者 艾建光 姜峰 言兰 AI Jianguang1 JIANG Feng1 YAN Lan2. 1. Institute of Manufacturing Engineering Huaqiao University Xiamen Fujian 361021 2.College of Mechanical Engineering and Automation
出处 《中国机械工程》 EI CAS CSCD 北大核心 2017年第5期607-616,共10页 China Mechanical Engineering
基金 福建省高校产学研合作科研重大项目(2014H6018) 福建省自然科学基金资助项目(2016J01237) 福建省高校杰出科研人才培养计划资助项目(JA14013)
关键词 TC4-DT钛合金 Johnson-Cook本构模型 Power-Law本构模型 应变率 分离式霍普 金森压杆 TC4 - DT titanium alloy Johnson - Cook constitutive model Power - Law constitu-tive mode strain rate split Hopkinson pressure bar(SHPB)
  • 相关文献

参考文献14

二级参考文献184

共引文献326

同被引文献75

引证文献9

二级引证文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部