期刊文献+

寒区低压输水灌溉管道环刚度试验及选择 被引量:1

Ring stiffness experimental investigations and analysis of low pressure irrigation pipeline in cold region
下载PDF
导出
摘要 本文对水利部科技推广中心"水利部竹基缠绕复合管示范工程"中的竹纤维缠绕复合压力管进行了标准环境和低温环境下的环刚度试验,并通过外荷载作用下竖向变形验算,复核实际服役条件下竹复管环刚度是否满足竖向变形要求。结果表明,如果示范工程在施工中选用正确的施工方法,保证埋设情况达到设计要求,竹复管的变形能力能抵抗外荷载的作用,满足竖向变形要求。 The ring stiffness of bamboo-based composites pipe was studied under the standard environment and low temperature environment in this paper, which was used in demonstration project of Ministry of Water Resources. Checking whether the ring stiffness of bamboo-based composites pipe to meet the requirements of vertical deformation in actual service condition through the vertical deformation calculation. The deformation calculation results show that if we choose the right construction methods in the construction to ensure the construction quality to meet the design requirements, the deformation coordination of bamboo-based composites pipe can resist external loads.
出处 《黑龙江水利》 2017年第1期7-9,共3页
关键词 寒区 竹复管 低压管道 环刚度 综合变形模量 变形验算 cold region bamboo-based composites pipe low pressure irrigation pipeline ring stiffness composite deformation modulus deformation analysis
  • 相关文献

参考文献1

二级参考文献10

  • 1[1]ISO 9969,Thermoplastics pipes-determination of ring stiffness[S].
  • 2[2]ISO 13967,Thermoplastics fittings-determination of ring stiffness[S].
  • 3[3]ISO 13966,Thermoplastics pipes and fittings-nominal ring stiffness[S].
  • 4[4]prEN 13476-1,Thermoplastics piping systems for non-pressure under-ground drainage and sewage-structured-wall piping systems of unplasticized poly(vinyl chloride)(PVC-U),polypropylene(PP),and polyethylene(PE)-Part 1:Specification for pipes,fittings and the system[S].
  • 5[5]QB/T 1916-93,硬聚氯乙淆(PVC-U)双壁波纹管材[S].
  • 6[6]GB/T 10002.3,埋地排污、废水用硬聚氯乙烯(PVC-U)管材[S].
  • 7[7]DIN 16961,Thermoplastics pipes and fittings with profiled outer and smooth inner surfaces Part 1:Dimensions;Part 2:Technical delivery conditions[S].
  • 8[8]ASTM 2412,Determination of characteristics of plastic pipe by parallel-plate loading[S].
  • 9[9]ASTM 2412,ASTM F 894,Polyethylene (PE) large diameter profile wall sewer and drain pipe[S].
  • 10[10]CECS 122,埋地硬聚氯乙烯排水管工程技术规程[S].

共引文献28

同被引文献9

引证文献1

二级引证文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部