期刊文献+

自适应补偿器永磁同步电机积分型连续滑模控制 被引量:12

Integral continuous sliding mode control strategy with adaptive compensator for permanent magnet synchronous motor
下载PDF
导出
摘要 考虑参数不确定、齿槽转矩、谐波反电动势及电压源逆变器非线性畸变等非理想因素,为提高永磁同步电机驱动系统对参数不确定及非线性扰动下的鲁棒性、高动态特性,提出一种带自适应扰动补测器的积分型连续滑模控制策略。连续滑模控制器无抖振且保证了闭环系统在参数不确定和扰动下的有界。滑模面上的自适应扰动补偿器一方面降低了滑模控制器增益,另一方面保证了系统渐进收敛。最后,通过仿真分析验证了所提控制策略的有效性和优越性。 In order to improve the parameter and nonlinear disturbance robustness and dynamics of permanent magnet synchronous motor drive system,an integral continuous sliding mode controller with adaptive disturbance observer is proposed,in which the parameter uncertainty,cogging torque and voltage source inverter nonlinear distortion are considered. The sliding mode controller avoided the chattering and made the system bounded with parameter uncertainty and nonlinear disturbance. Meanwhile,the adaptive disturbance compensator which moved on the sliding mode surface reduced the gain of the sliding mode controller and made the system asymptotically stable. At last,the resualts of the simulations verify the feasibility and the superiority of the control strategy.
出处 《电机与控制学报》 EI CSCD 北大核心 2017年第2期103-108,共6页 Electric Machines and Control
基金 辽宁省博士启动基金(201501088)
关键词 永磁同步电机 积分型连续滑模控制 自适应扰动补偿器 参数不确定 齿槽转矩 谐波反电动势 电压源逆变器非线性畸变 permanent magnet synchronous motors integral continuous sliding mode control adaptive disturbance compensator parameter uncertainty cogging torque back electromotive force harmonics voltage source inverter nonlinear distortion
  • 相关文献

参考文献4

二级参考文献54

  • 1杨文强,蔡旭,姜建国.矢量控制系统的积分型滑模变结构速度控制[J].上海交通大学学报,2005,39(3):426-428. 被引量:25
  • 2贾洪平,贺益康.永磁同步电机滑模变结构直接转矩控制[J].电工技术学报,2006,21(1):1-6. 被引量:98
  • 3于海生,赵克友,郭雷,王海亮.基于端口受控哈密顿方法的PMSM最大转矩/电流控制[J].中国电机工程学报,2006,26(8):82-87. 被引量:114
  • 4JAHNS Thomas M, SOONG Wen L. Pulsating torque minimization techniques for permanent magnet AC motor drives-a review [ J ]. IEEE Transactions on Industrial Electronics, 1996, 43 ( 2 ) : 321 - 330.
  • 5ISLAM Rakib, HUSAIN Iqbal, nent-magnet synchronous motor FARDOUN Abbas, et al. Perma- magnet designs with skewing for torque ripple and cogging torque reduction[ J]. IEEE Transactions on Industry Applications, 2009, 45 ( 1 ) : 152 - 160.
  • 6DOSIEK Luke, PILLAY Pragasen. Cogging torque reduction in permanent magnet machines [ J ]. IEEE Transactions on Industry Applications, 2007, 43(6) : 1565 - 1571.
  • 7KANG G H, SON Y D, KIM G T, et al. A novel cogging torque reduction method for interior-type permanent-magnet motor [ J ]. IEEE Transactions on Industry Applications, 2009, 45 ( 1 ) : 161 - 167.
  • 8HUNG J Y, DING Z. Design of currents to reduce torque ripple in brushless permanent magnet motors[ J]. IEE Proceedings B: Elec- tric Power Applications, 1993, 140(4):260-266.
  • 9HANSELMAN Duane C. Minimum torque ripple, maximum effi- ciency exeltation of brushless permanent magnet motors[J]. IEEE Transactions on Industrial Electronics, 1994, 41 (3) : 292 - 300.
  • 10CLENET S, LEFEVRE Y, SADOWSKI N, et al. Compensation of permanent magnet motors torque ripple by means of current supply waveshapes control determined by finite element method [ J ]. IEEE Transactions on Magnetics, 1993,29(2) : 2019 -2023.

共引文献264

同被引文献125

引证文献12

二级引证文献104

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部