期刊文献+

一种少自由度飞行模拟实验台的尺度综合方法 被引量:2

Dimensional Synthesis of Less DOF Experiment Platform of Flight Simulator
下载PDF
导出
摘要 研究了一种少自由度飞行模拟实验台,该实验台由动平台、静平台和二者之间3条互成120°的PRS欠约束主动支链组成。提出了一种基于尺度参数平面的多评价指标尺度综合方法,将实验台模拟性能、刚度、操作性能和铰链最大转角作为评价指标,研究并讨论了各尺度参数变化对各评价指标的影响规律。在尺度参数平面内绘制出各评价指标的等值线,根据影响规律和等值线综合出满足各评价指标的尺度参数区域,进而在满足各评价指标的尺度参数区域内确定实验台的尺度参数,最后通过算例验证了该尺度综合方法的有效性。 A less DOF experiment platform of flight simulator was studied,which is composed of a moving platform,a static platform and three PRS active branch chains between them. The active branch chains had 120° between each other. Based on scale parameter plane,a multiple-evaluation-indexes dimensional synthesis approach was proposed in this paper. It was taken the simulation performance,stiffness,operating performance and maximum angle of hinge as evaluation indexes. The influence laws of scale parameters to evaluation indexes were studied and discussed. In the scale parameter plane,the contour of evaluation indexes was drawn. According to the influence laws and the contour,the scale parameter region was confirmed and the region was satisfied the range of evaluation indexes. Then the scale parameter was determined in the region. Finally,the effectiveness of the method was proved by the example.
作者 张志旭 洪振宇 张亚伟 许致华 Zhang Zhixu Hong Zhenyu Zhang Yawei Xu Zhihua(Basic Experiment Center, Civil Aviation University of China, Tianjin 300300, China College of Aeronautical Engineering, Civil Aviation University of China, Tianjin 300300, China College of Electronic Information and Automation, Civil Aviation University of China, Tianjin 300300,China)
出处 《机械科学与技术》 CSCD 北大核心 2017年第3期487-492,共6页 Mechanical Science and Technology for Aerospace Engineering
基金 中国民用航空局科技项目(MHRD20130218) 中央高校基本科研业务费项目(3122015C014)资助
关键词 飞行模拟实验台 尺度综合 尺度参数平面 等值线 影响规律 experiment platform of flight simulator dimensional synthesis scale parameter plane contour influence law
  • 相关文献

参考文献6

二级参考文献67

  • 1SUN Tao1,SONG YiMin1,LI YongGang2 & LIU LinShan1 1 School of Mechanical Engineering,Tianjin University,Tianjin 300072,China,2 School of Mechanical Engineering,Tianjin University of Technology and Education,Tianjin 300222,China.Dimensional synthesis of a 3-DOF parallel manipulator based on dimensionally homogeneous Jacobian matrix[J].Science China(Technological Sciences),2010,53(1):168-174. 被引量:17
  • 2杨灏泉,赵克定,吴盛林,曹健.飞行模拟器六自由度运动系统的关键技术及研究现状[J].系统仿真学报,2002,14(1):84-87. 被引量:34
  • 3刘忠,梁晓庚,贾晓洪,曹秉刚.基于四元数的导弹全方位姿态运动误差研究[J].弹道学报,2006,18(2):5-8. 被引量:6
  • 4张立杰,牛跃伟,李永泉,黄真.基于工作空间的球面5R并联机器人机构设计[J].机械工程学报,2007,43(2):55-59. 被引量:9
  • 5CLAVEL R. Device for the movement and positioning of an element in space: USA, US 4976582[P]. 1990-12-11.
  • 6HUANG T, LI Z X, LI M. Conceptual design and dimensional synthesis of a novel 2-DOF translational parallel robot for pick-and-place operations[J]. ASME Journal of Mechanical Design, 2004, 126(5): 449-455.
  • 7PIERROT F, COMPANY O. H4: A new family of 4-dof parallel robots[C]// Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, September 19-23, 1999, Atlanta. New York: IEEE, 1999: 508-513.
  • 8NABAT V, COMPANY O, KRUT S, et al. Par4: Very high speed parallel robot for pick-and-place[C]// Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, August 2-6, 2005, Alberta. New York: IEEE, 2005:1 202-1 207.
  • 9GOSSELIN C M, ANGELES J. The optimum kinematic design of a spherical 3-DOF parallel manipulator[J]. ASME Journal of Mechanism, Transmission, and Automation in Design," 1989, 111(2): 202-207.
  • 10ZANGANEH K, ANGELES J. Kinematic isotropy and the optimum design of parallel manipulators[J]. Int. J. Robot. Res., 1997, 6(2): 185-197.

共引文献86

同被引文献11

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部