期刊文献+

磨机介质填充率人工检测法的计算优化研究 被引量:2

Study on Calculation Optimization of Artificial Inspection Method for Medium Filling Rate of Grinding
下载PDF
导出
摘要 介质充填率是磨机运行的重要指标之一,介质充填率的准确检测是保证稳定生产运行的关键。通过数学理论推导,得出介质填充率的计算公式,并得到介质面弦长或介质面距筒体顶的高度与磨机半径的比值与介质填充率的对应表,实际测量可直接根据比值在对应表中查找理论填充率,省略了计算过程,结果准确可靠。还列出了介质面弦长、介质面距筒体顶高度的经验公式与介质填充率对照表,并提出了经验公式详细的适用范围及与理论值的误差率。 The medium filling rate is one of the important indexes of the mill operation. Accurate detection of the medium filling rate is the key factor to ensure the stable production operation. The formula of the medium filling rate is obtained by the mathematical theory deduction, and the correspondence between the ratio of the chord length of the medium surface or the height of the media surface from the top of the cylinder to the radius of the medium and the medium filling rate can be obtained according to the actual measurement. Which related to the theoretical filling rate in the corresponding table. The calculation process is omitted and the results are accurate and reliable
作者 王倩
出处 《煤矿机械》 2017年第3期101-103,共3页 Coal Mine Machinery
基金 中煤科工集团有限公司青年基金项目(2014QN039)
关键词 磨机 介质填充率 人工检测 mill medium filling rate artificial inspection
  • 相关文献

参考文献1

二级参考文献5

共引文献4

同被引文献12

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部