炼胶物料输送系统的改进

Improvement of Material Conveying System for Compound Mixing

对传统炼胶物料输送系统进行改进。原炼胶车间物料通过电梯运输到各楼层,再由操作人员用手动液压车或叉车搬运到机台,物料输送流程繁冗不畅,电梯运行压力大,物流成本高。采用自动化系统对炼胶车间的物流输送系统进行改进后,生胶采用往复式提升输送系统运送,车间设备和物流人员减少,物流布局优化,工艺流程精简,生产效率和安全性提高,经济效益良好,符合现代化轮胎企业物流发展方向。

In this study, the traditional conveying system for compound mixing was improved. With the traditional system, raw materials of compound mixing workshop were transported to each floor through the elevator, and then transported by the operator to the mixing machine by hand hydraulic carrier and forklift. The material conveying process was cumbersome with a large load on the elevator and the logistics cost was high. In the improvement, automation system was adopted, in which raw rubber was transported by the reciprocating lifting system, the numbers of workshop equipment and logistics staff were reduced, the logistics layout was also optimized, and the technological process was streamlined. After the improvement, the production efficiency and safety were improved and the economic benefit was good. The improved system was in line with the development direction of modern logistics for tire manufacturers.