基于PLC的双路CAN在采煤机通讯系统中的应用被引量：5

Application of Dual CAN in Coal Mining Machine Communication System Based on PLC

下载PDF

导出

摘要介绍了以PLC为控制器的双路CAN在采煤机通讯系统中的应用,使用主从结构的2个CAN通讯模块,作用于PLC和各CAN节点之间的数据接收与发送,继而实现采煤机电控箱的CAN通讯系统和采煤机远程通讯系统的分离,使之互不干扰。 Introduces the PLC as the controller of the dual-CAN communication system in the application of coal mining machine, the use of master-slave structure of the two CAN communication module, acting on the PLC and CAN devices between the data receiving and sending, and then to achieve the CAN communication system of shearer electric control box and the shearer remote communication system are separated, so that they do not interfere with each other.

作者封平安赵亦辉田江伟

机构地区西安煤矿机械有限公司

出处《煤矿机械》 2017年第4期165-166,共2页 Coal Mine Machinery

关键词 CAN 采煤机通讯系统 CAN coal mining machine communication system

分类号 TD421.6 [矿业工程—矿山机电]

引文网络
相关文献

参考文献5

1孙永锋,王亮,党景锋.薄煤层无人工作面采煤机关键技术及实现方法[J].煤矿机电,2012,33(5):30-32. 被引量：14
2任朋飞,刘志明,王勃.CAN总线技术在采煤机应用中的问题分析与处理[J].煤矿机电,2015,36(3):14-16. 被引量：9
3郝勃,刘衍珩,曲良东,魏达.CAN网络的分组合并策略研究及实现[J].仪器仪表学报,2012,33(9):2137-2143. 被引量：31
4刘国平,邱吉元,李建武.基于双CAN总线的液压支架控制系统的设计[J].工矿自动化,2009,35(6):65-68. 被引量：16
5符大利,袁建平.国产综采装备在黄陵矿业的无人化开采应用[J].煤矿机电,2015,36(1):125-126. 被引量：9

二级参考文献20

1孙晓健,张东来.CAN总线在液压支架电液控制系统的应用[J].微计算机信息,2006(06Z):97-98. 被引量：21
2饶运涛,邹继军,王进宏,等.现场总线CAN原理与应用技术[M].北京:北京航空航天大学出版社,2007.
3OSEK/VDX Organization. OSEK/VDX Network Manage- ment Concept and Application Programming Interface Version 2.5.3 [ S]. 2004.
4HOFFMANN C, JOHN D, KRAMMER J, et al. OSEK/ VDX network management [ C ]. OSEK/VDX Open Sys- tems in Automotive Networks, IEE Seminar, 1998: 611-613.
5SON CH W, SEO S H, KIM J H, et al. Comparison of two types of OSEK network management for CAN [ C ]. IEEE International Symposium on Industrial Electronics (ISLE 2009) , Seoul, Korea, 2009:415-419.
6SUWA3-FHIKUL J, MCMURRAN R, JONES R P. Adaptive OSEK network management for in-vehicle net- work fault detection[ C ]. Vehicular Electronics and Safe- ty, 2007 : 1-6.
7SON CH W, KIM J H, MOON T Y, et al. Timing analy- sis of worst case with direct NM of OSEK NM [ C ]. Inter- national Conference on Control, Automation and Systems, 2008:563-568.
8BARRANCO M, PROENZA J, RODRIGUEZ-NAVAS G et al. An active star topology for improving fault confine- ment in CAN networks [ J]. IEEE Transactions on Indus- trial Informatics, 2006:78-85.
9DAVIS RI, KOLLMANN S, POLLEX V, et al. Control- ler area network (CAN) schedulability analysis with FIFO queues [ C ]. 23rd Euromicro Conference on Real- Time Systems, 2011:45-56.
10WEI CH J, YAO M, LU P, et al. OSEK/VDX-based dynamic network management on automotive network [ C]. International Conferences on Embedded Software and Systems, 2009 : 131-137.