摘要
针对LLC谐振变换器不适合宽范围输入,且在宽范围输入时整个负载范围内效率较低的缺陷,提出一种将可变倍频技术和Burst控制模式相结合的方法。分析了该方法的实现过程,并通过一台300 W的样机验证了其可行性。测试数据表明,该变换器可实现100 V^400 V的宽范围输入;在此输入下,当20%以上负载时效率可达到94.8%~96.5%,当5%~20%负载时效率能达到93.5%以上,当小于5%负载时效率能达到87.8%以上。
To solve the disadvantage of the LLC resonant converter is not suitable for wide range input, and the efficiency is low in the whole load range as the wide range input. A method of combining variable frequency multiplier technique and burst-mode control strategy is proposed. The implementation processes of this method are analyzed, and its feasibility is verified by a 300 W prototype. The test data show that the converter can achieve wide input range of 100 V-400 V. Under this range ,the efficiency can reach 94.8% ~96.5% at the load more than 20% and achieve more than 93.5% at the load 5%~20% ,and in of load condition less than 5% the efficiency is higher than 87.8%.
出处
《电子器件》
CAS
北大核心
2017年第1期256-261,共6页
Chinese Journal of Electron Devices
基金
国家自然科学基金项目(59493300)
教育部博士点基金项目(9800462)
陕西省工业科技攻关项目(2015GY173)
西安市产学研协同创新计划项目(CXY1513-5)