期刊文献+

Evaluation and Selection of Sealants and Fillers Using Principal Component Analysis for Cracks in Asphalt Concrete Pavements 被引量:8

Evaluation and Selection of Sealants and Fillers Using Principal Component Analysis for Cracks in Asphalt Concrete Pavements
下载PDF
导出
摘要 The objective of this paper was to develop a comprehensive evaluation method and index to evaluate the performance of sealants and fillers for cracks in asphalt concrete pavements using the method of principal component analysis. The performance experiments including cone penetration, softening point, flow, resilience and tension at low temperature respectively were conducted by reference of ASTM D5329 for eight sealants and fillers often used in China. There by a principal component model was developed and weight of every index was calculated. The experimental results show that there are significantly different performances for sealants and fillers often used in China. Principal component analysis is an objective method that evaluates and selects the performance of sealants and fillers for cracks in asphalt concrete pavements. The objective of this paper was to develop a comprehensive evaluation method and index to evaluate the performance of sealants and fillers for cracks in asphalt concrete pavements using the method of principal component analysis. The performance experiments including cone penetration, softening point, flow, resilience and tension at low temperature respectively were conducted by reference of ASTM D5329 for eight sealants and fillers often used in China. There by a principal component model was developed and weight of every index was calculated. The experimental results show that there are significantly different performances for sealants and fillers often used in China. Principal component analysis is an objective method that evaluates and selects the performance of sealants and fillers for cracks in asphalt concrete pavements.
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2017年第2期408-412,共5页 武汉理工大学学报(材料科学英文版)
基金 Funded by the National Natural Science Foundation of China(Nos.51408287 and 51668038) the Rolls Supported by Program for Changjiang Scholars and Innovative Research Team in University(IRT_15R29) the Distinguished Young Scholars Fund of Gansu Province(1606RJDA318) the Natural Science Foundation of Gansu Province(1506RJZA064) the Excellent Program of Lanzhou Jiaotong University(201606)
关键词 road materials asphalt pavement sealants and fillers principal component analysis comprehensive evaluation road materials asphalt pavement sealants and fillers principal component analysis comprehensive evaluation
  • 相关文献

参考文献3

二级参考文献10

  • 1ASTM D5329-04, standard test methods for sealants and fillers, hot-applied, for joints and cracks in asphaltic and Portland cement concrete pavements[S].
  • 2ASTM D5078-95, standard specification for crack filler, hot-applied, for asphalt concrete and Portland cement concrete pavements[S].
  • 3ASTM D1190-97, standard specification for concrete joint sealer, hot-applied elastic type[S].
  • 4ASTM D3405-97, standard specification for joint sealants, hot-applied, for concrete and asphalt pavements[S].
  • 5ASTMD6690-06a, standard specification for joint and crack sealants, hot applied, for concrete and asphalt pave ments[S].
  • 6ASTM D1985-91, standard practice for preparing concrete blocks for testing sealants, for joints and cracks[S].
  • 7ASTM D217-02, standard test methods for cone penetration of lubricating grease[S].
  • 8李峰,黄颂昌,徐剑,秦永春.沥青路面灌缝胶性能评价及技术要求[J].交通运输工程学报,2009,9(2):7-11. 被引量:32
  • 9钱振东,韩光义,黄卫,尹祖超.基于BOTDA的钢桥面铺装裂缝疲劳扩展研究[J].土木工程学报,2009,42(10):132-136. 被引量:23
  • 10李峰,石小培,徐剑.沥青路面裂缝贴缝带的性能评价及技术要求[J].北京工业大学学报,2013,39(12):1855-1860. 被引量:6

共引文献32

同被引文献59

引证文献8

二级引证文献44

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部