期刊文献+

汽车内饰聚丙烯材料VOC产生和自然衰减研究 被引量:18

Study on VOC Production and Natural Attenuation of Automotive Interior Polypropylene
下载PDF
导出
摘要 通过检测汽车内饰材料在室温(25℃)条件下放置不同时间后的VOC浓度得出VOC的衰减规律。材料中的甲苯、甲醛和乙醛都可以衰减至约20μg/m^3,但呈现衰减速率随不同材料而异。进而分析了甲苯、TVOC、甲醛、乙醛等物质的衰减规律差异性:苯类VOC的衰减速率要小于醛类VOC的衰减速率,而醛类中的乙醛衰减速率要大于甲醛的衰减速率。该研究为后续低VOC车用内饰材料的开发以及VOC加速衰减的研究提供参考。 In this paper,the attenuation law of VOC is obtained by measuring the attenuation of VOC in the interior decoration materials at room temperature(25℃).The content of toluene,formaldehyde and acetaldehyde in the material can be reduced to about 20μg/m3 and the decay rate varies with different materials.The attenuation differences among toluene,TVOC,formaldehyde and acetaldehyde have been analyzed.The decay rate of the benzenetype VOC is less than aldehyde-type VOC,and the decay rate of acetaldehyde is greater than that of formaldehyde.The above research provides a reference for the following research on the development of low VOC interior materials of automobile and the research of VOC acceleration attenuation.
作者 杨波 彭莉 李振华 罗忠富 姚程 吴国锋 马金成 YANG Bo PENG Li LI Zhen-hua LUO Zhong-fu YAO Cheng WU Guo-feng MA Jin-cheng(Kingfa Sci. & Tech. Co., Ltd., Guangzhou 510663 ,Guangdong,China SGS-CSTC Standards Technical Services Co.,Ltd. Guangzhou Branch,Guangzhou 510663 ,Guangdong,China)
出处 《合成材料老化与应用》 2017年第2期1-6,12,共7页 Synthetic Materials Aging and Application
基金 Pearl River S&T Nova Program of Guangzhou专项资助(2014J2200093)
关键词 汽车内饰聚丙烯材料 挥发性有机物(VOC) 衰减 automotive interior polypropylene volatile organic compounds(VOC) attenuation
  • 相关文献

参考文献9

二级参考文献84

  • 1顾培韵.聚合物系的脱挥发分设备[J].合成橡胶工业,1994,17(4):195-199. 被引量:11
  • 2杨涛,陈晓东,吴小龙.综合性能优异的汽车用新型聚丙烯专用料的研制[J].工程塑料应用,2005,33(10):16-19. 被引量:6
  • 3齐虹,孙德智,迟国庆.光催化降解甲醛的影响因素及动力学研究[J].哈尔滨工业大学学报,2006,38(7):1051-1054. 被引量:12
  • 4邬国英,林西平,马风君,周永生.汽车用木粉/聚丙烯复合板的研制[J].木材工业,2007,21(1):27-29. 被引量:8
  • 5赵敏.改性聚丙烯新材料[M].北京:化学工业出版社,2010:289-317.
  • 6Dennis S. Ionomer modified polypropylene corn pound for superior scratch performance, low blushing and molded in color with controllable gloss:US ,2006/0020086A1 [ P]. 2006-01-26.
  • 7Hadal R, Dasari A, Rohrmann J, et al. Susceptibility to scratch surface damage of wollastonite and talc containing polypropylene micrometric composites [ J ]. Materials Science and Engineering A, 2004,380 ( 1 - 2) :326 - 339.
  • 8Chu J, Rumao L, Coleman B. Scratch and mar resistance of filled polypropylene materials [ J]. Polymer Engineering and Science, 1998,38(11) :1906 -1914.
  • 9Xiang C,Sue H J,Chu J. Roles of additives in scratch resistance of high crystallinity polypropylene copolymers[ J]. Polymer Engineering and Science,2001,41 ( 1 ) :23 - 31.
  • 10Wean J I,Song Siyong,Choi K Y,et al. Quantitative determination of scratch-induced damage visibility on polymer surfaces[ J]. Journal of Material Science,2010,45(10) :2649 -2654.

共引文献87

同被引文献136

引证文献18

二级引证文献60

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部