摘要
选用单体α-氰基丙烯酸乙酯、增韧剂、稳定剂及其他助剂制备了2种α-胶样,其中样1的单体纯度较高,样2的单体纯度较低,其余组分相同。通过对比2种胶样的性能发现,单体纯度较高的样1在固化时间、耐热性、耐湿热方面都明显高于单体纯度较低的样2,单体纯度对热老化性能的影响不大。
In this work, we prepared two α-cyanoacrylate adhesive samples (1 and 2), which mainly comprise the ethyl α-cyanoacrylate monomer, toughening agent, stabilizer and other additives. Sample 1 and 2 used the high purity monomer and the low purity monomer, respectively, and other components were same. The results indicated that sample 1 showed improved cure speed, hot strength and wet heat resistance, compared to sample 2, and the effect of monomer purity on the heat ageing property was not obvious.
作者
刘洁
LIU Jie(Beijing Tonson Adhesive Co., Ltd., Beijing 100041, China)
出处
《粘接》
CAS
2017年第5期45-47,共3页
Adhesion
关键词
氰基丙烯酸乙酯
纯度
性能
ethyl α-cyanoacrylate
purity
performance