摘要
利用πS-S补偿网络结合恒定互感耦合线圈实现无调压模块接收端的恒压输出.首先,对πS-S补偿网络进行建模与分析.其次,提出恒定互感耦合线圈的通用设计方法,实现接收端横向偏移下的互感恒定.最后,通过样机实验,验证所提出设计方法的可行性与准确性.实验样机的接收端直流输出电压波动小于3.6%,补偿网络与耦合线圈的传输效率达到95%,整机效率峰值达到82%.
A novel WPT system which contains nS-S compensation network and coupling coils with constant mutual inductance is proposed. The output voltage of receiver keeps constant without regular. It overcomes the drawbacks of present receiver with regular. Firstly,the nS-S compensation network is modeled and analyzed. Secondly, a design method of transmitting coil, which makes the mutual in-ductance constant, is also proposed. The mutual inductance of coupling coil keeps constant with the lateral movement of receiving coil. Finally, a WPT prototype with 1 megahertz is built to verify the deign method proposed. The output voltage drift of receiver is less than 3.6% with the variation of out-put power. The efficiency of coupling coils and its compensation network reaches 95%. The peak effi-ciency of prototype reaches 82%.
作者
林抒毅
黄晓生
LIN Shuyi HUANG Xiaosheng(College of Information Science and Engineering,Fujian University of Technology, Fuzhou,Fujian 350118,China)
出处
《福州大学学报(自然科学版)》
CAS
北大核心
2017年第3期367-373,共7页
Journal of Fuzhou University(Natural Science Edition)
基金
国家自然科学基金资助项目(51607039)
福建工程学院科研发展基金资助项目(GY-Z15102)
福建工程学院科研启动基金资助项目(GY-Z14074)
关键词
无线电能传输
补偿网络
耦合线圈
均匀磁场
恒定互感
wireless power transfer
compensation network
coupling coils
uniform magnetic field
constant mutual inductance