摘要
Bulk metallic glasses(BMGs)have attracted considerable attention in the last few decades particularly triggered by their potential applications as novel structural and/or functional materials,owing to their superior strength,large elastic strain limit and relatively low Young′s modulus etc.compared to their crystalline counterparts.Here,a 3Dreconstruction application to the fractography and the morphology of shear bands was reported for a ductile Zr_(56)Co_(28)Al_(16)(at.%)BMG through a Phenom series desktop scanning electron microscope.The results of the 3Dreconstruction and the following contour analysis indicate a typical shear fracture mode for the investigated alloy.It is inferred that the fractography and the morphology of shear bands might be dependent on their composition,structure states,and loading conditions for BMGs.
Bulk metallic glasses(BMGs)have attracted considerable attention in the last few decades particularly triggered by their potential applications as novel structural and/or functional materials,owing to their superior strength,large elastic strain limit and relatively low Young′s modulus etc.compared to their crystalline counterparts.Here,a 3Dreconstruction application to the fractography and the morphology of shear bands was reported for a ductile Zr_(56)Co_(28)Al_(16)(at.%)BMG through a Phenom series desktop scanning electron microscope.The results of the 3Dreconstruction and the following contour analysis indicate a typical shear fracture mode for the investigated alloy.It is inferred that the fractography and the morphology of shear bands might be dependent on their composition,structure states,and loading conditions for BMGs.
基金
supported by National Natural Science Foundation of China(51301078,51461026and51671120)
the Specialized Research Fund for the Doctoral Program of Higher Education of China(20135314120002)
the Scientific Research Foundation of Department of Education,Yunnan(2017YJS059)
the Young Talents Support Program of Faculty of Materials Science and Engineering,Kunming University of Science and Technology(20140102)