摘要高速电子通讯的稳定性的一个重要前提可以保证通信信号传输的稳定性。随着网络规模的增加,电子通讯的网络节点的工作状态分为正常传输和拥堵状态,使沟通的不平衡。传统方法建立一个稳定的网络拓扑模型,以下两种状态的识别和分类,并且不能计算的平衡范围两种状态转换概率,稳定的网络模型精度不高,误差较大。仿真结果表明,克拉Suo Fu Si的基础稳定,高速的电子通讯网络拓扑设计建模方法可以有效地保证网络拓扑结构的稳定性。
2Malapelle P L G,Torri G,Moruzzi R,et al.A new,modular,programmable,high speed digitalcontrol for large drives[C].IEEE IECON 20th International Conference on IndustrialElectronics,Control and Instrumentation,Bolagna,Italy,1994.
3Kun Xing.Modeling,analysis,and design of distributed power electronics system based onbuilding block concept[D].Ph.D.Dissertation,Virginia Polytechnic Institute and StateUniversity,Blacksburg,Orlando,USA,1999.
4Bassi E,Benzi F,Lusetti L,et al.Communication Protocols for Electrical Drives[C].IEEEIECON Proceedings,Orlando,USA,1995.
5du Toit,J A,le Roux A D,Enslin J H R.An integrated controller module for distributedcontrol of power electronics[C].Applied Power Electronics Conference andExposition,1998.APEC '98.Conference Proceedings 1998,Thirteenth Annual Volume 2,1998.
6Celanovic I,Milosavljevic I,Boroyevich D,et al.A new distributed controller for thenext generation power electronics building blocks[C].IEEE APEC Proceedings,NewOrleans,LA,USA,2000.
7J A Du Toit,A D Le Roux,J H R Enslin.An integrated controller module for distributedcontrol of power electronics[C].IEEE APEC'98 Proceedings,New Orleans,LA,USA,1998.
8Ericsen T.Open plug and play power architectures simplifies system integration[M].PCIMMagazine,2000.
9Jinghong Guo,Celanovic I,Borojevic D.Distributed software architecture of PEBB-basedplug and play power electronics systems[C].Applied Power Electronics Conference andExposition,2001.APEC 2001.Sixteenth Annual IEEE Volume 2,4-8 March 2001 Page(s):772-777Vol.2 Digital Object Identifier 10.1109/APEC.2001.
10Wu J,Dai H,Xing K,et al.Implementation of a ZCT Soft Switching Technique in a 100 kWPEBB Based Three-Phase PFC Rectifier[C].IEEE PESC Conference Proceedings,SouthCarolina,USA,1999.