摘要
This work investigates the effects of lubricant sulfur contents on the morphology,nanostructure,size distribution and elemental composition of diesel exhaust particle on a light-duty diesel engine. Three kinds of lubricant（LS-oil,MS-oil and HS-oil,all of which have different sulfur contents：0.182%,0.583% and 1.06%,respectively）were used in this study. The morphologies and nanostructures of exhaust particles were analyzed using high-resolution transmission electron microscopy（TEM）. Size distributions of primary particles were determined through advanced image-processing software. Elemental compositions of exhaust particles were obtained through X-ray energy dispersive spectroscopy（EDS）. Results show that as lubricant sulfur contents increase,the macroscopic structure of diesel exhaust particles turn from chain-like to a more complex agglomerate. The inner cores of the core-shell structure belonging to these primary particles change little; the shell thickness decreases,and the spacing of carbon layer gradually descends,and amorphous materials that attached onto outer carbon layer of primary particles increase. Size distributions of primary particles present a unimodal and normal distribution,and higher sulfur contents lead to larger size primary particles. The sulfur content in lubricants directly affects the chemical composition in the particles. The content of C（carbon）decreases as sulfur increases in the lubricants,while the contents of O（oxygen）,S（sulfur）and trace elements（including S,Si（silicon）,Fe（ferrum）,P（phosphorus）,Ca（calcium）,Zn（zinc）,Mg（magnesium）,Cl（chlorine）and Ni（nickel））all increase in particles.
This work investigates the effects of lubricant sulfur contents on the morphology,nanostructure,size distribution and elemental composition of diesel exhaust particle on a light-duty diesel engine. Three kinds of lubricant（LS-oil,MS-oil and HS-oil,all of which have different sulfur contents：0.182%,0.583% and 1.06%,respectively）were used in this study. The morphologies and nanostructures of exhaust particles were analyzed using high-resolution transmission electron microscopy（TEM）. Size distributions of primary particles were determined through advanced image-processing software. Elemental compositions of exhaust particles were obtained through X-ray energy dispersive spectroscopy（EDS）. Results show that as lubricant sulfur contents increase,the macroscopic structure of diesel exhaust particles turn from chain-like to a more complex agglomerate. The inner cores of the core-shell structure belonging to these primary particles change little; the shell thickness decreases,and the spacing of carbon layer gradually descends,and amorphous materials that attached onto outer carbon layer of primary particles increase. Size distributions of primary particles present a unimodal and normal distribution,and higher sulfur contents lead to larger size primary particles. The sulfur content in lubricants directly affects the chemical composition in the particles. The content of C（carbon）decreases as sulfur increases in the lubricants,while the contents of O（oxygen）,S（sulfur）and trace elements（including S,Si（silicon）,Fe（ferrum）,P（phosphorus）,Ca（calcium）,Zn（zinc）,Mg（magnesium）,Cl（chlorine）and Ni（nickel））all increase in particles.
基金
supported by the National Natural Science Foundation of China(No.50906062)
