多密度矿粒干法分选装置设计及试验研究

Design and Experiment of the Sorting Device of the Multi Density Mineral

由于传统的重选法、浮选法和磁选法等选矿工艺技术的制约,尾矿中仍含有很多有价金属物质未被选出,且对环境都造成了极大的污染。依据多密度矿物干法分选原理,自行设计制造一台多密度干法分选装置,通过试验研究得出,在不同分布距离上,当风速为4.2 m/s时金属铜风选富集效果最佳;在不同分布距离上,粒径越大,钨含量则越高,粒径为200~300μm时组分含量达到最大值69.7%;本试验装置达到了结构简单、体积小、零污染且能高效分离不同矿物金属等特性。

Due to the restriction of the traditional technique of gravity separation, flotation and magnetic separation, there are still a lot of valuable metals are not sorted in tailings, and the long-term accumulation of tailings caused serious pollution to the environment. Based on the multi density particle dry separation principle, we ourselves designed a multi density particle dry separation device, and the experiment results showed that： in different distribution distance, when wind speed is 4. 2m/s, the Metal copper separation and enrichment effect is the best; The larger the particle size, the higher the content of Tungsten and when the particle size is 60-80 mesh, the component content of Tungsten reaches a maximum value of 69.7% ; The test device has the characteristics of simple structure, small volume, zero pollution and high efficiency of separation of different metal minerals.