摘要
为准确评价高密度聚乙烯(HDPE)粉尘爆炸敏感性和开展有效的粉尘防爆工作,采用Godbert-Greenwald恒温炉标准实验装置研究了典型HDPE粉尘云最低着火温度的分布特性,着重探讨了粉尘云浓度对不同喷尘压力条件下HDPE粉尘云最低着火温度的影响规律。研究表明:测试条件下HDPE粉尘云最低着火温度的变化处于360~445℃范围,随粉尘云浓度的增加呈现先降低后升高的总体趋势,粉尘云浓度为1.111 kg/m^3时出现拐点,且粉尘云最低着火温度随喷尘压力的增加而降低。
In order to evaluate the explosion sensitivity of high density polyethylene (HDPE) dust cloud accurately and carry out the dust explosion-proof work effectively, the distribution characteristics of the minimum ignition temperature for typical HDPE dust cloud were studied by using the standard experimental apparatus of Godbert-Greenwald constant temperature ov- en. The influence laws of concentration of dust cloud on the minimum ignition temperature of HDPE dust cloud under differ- ent dust spray pressures were discussed. The results showed that the minimum ignition temperature of HDPE dust cloud under the test conditions located in the range of 360 -445℃ , and it presented the general trend of decreasing first and then in- creasing with the increase of concentration of dust cloud. The inflection point appeared when the concentration of dust cloud was 1.111 kg/m^3 , and the minimum ignition temperature of HDPE dust cloud decreased with the increase of the dust spray pressure.
出处
《中国安全生产科学技术》
CAS
CSCD
北大核心
2017年第5期5-9,共5页
Journal of Safety Science and Technology
基金
北京市青年拔尖人才培养项目(2016000026833ZK05)
国家重点研发计划项目(2016HYC0801500)
北京石油化工学院优秀学科带头人培育计划项目(BIPT-BPOAL-2015)
北京石油化工学院国家级大学生创新创业训练计划项目(2016J00115)
关键词
粉尘爆炸
高密度聚乙烯
粉尘云最低着火温度
粉尘云浓度
dust explosion
high density polyethylene
minimum ignition temperature of dust cloud
concentration of dust cloud