摘要
Ternary Mn＋1AXn phases with layered hexagonal structures, as candidate materials used for next-generation nuclear reactors, have shown great potential in tolerating radiation damage due to their unique combination of ceramic and metallic properties. However, Mn＋1AXn materials behave differently in amorphization when exposed to energetic neutron and ion irradiations in experiment. We first analyze the irradiation tolerances of different Mn＋1AXn（MAX） phases in terms of electronic structure, including the density of states（DOS） and charge density map. Then a new method based on the Bader analysis with the first-principle calculation is used to estimate the stabilities of MAX phases under irradiation. Our calculations show that the substitution of Cr/V/Ta/Nb by Ti and Si/Ge/Ga by Al can increase the ionicities of the bonds,thus strengthening the radiation tolerance. It is also shown that there is no obvious difference in radiation tolerance between Mn＋1ACn and Mn＋1ANn due to the similar charge transfer values of C and N atoms. In addition, the improved radiation tolerance from Ti3AlC2 to Ti2AlC （Ti3AlC2 and Ti2AlC have the same chemical elements）, can be understood in terms of the increased Al/TiC layer ratio. Criteria based on the quantified charge transfer can be further used to explore other Mn＋1AXn phases with respect to their radiation tolerance, playing a critical role in choosing appropriate MAX phases before they are subjected to irradiation in experimental test for future nuclear reactors.
Ternary Mn＋1AXn phases with layered hexagonal structures, as candidate materials used for next-generation nuclear reactors, have shown great potential in tolerating radiation damage due to their unique combination of ceramic and metallic properties. However, Mn＋1AXn materials behave differently in amorphization when exposed to energetic neutron and ion irradiations in experiment. We first analyze the irradiation tolerances of different Mn＋1AXn（MAX） phases in terms of electronic structure, including the density of states（DOS） and charge density map. Then a new method based on the Bader analysis with the first-principle calculation is used to estimate the stabilities of MAX phases under irradiation. Our calculations show that the substitution of Cr/V/Ta/Nb by Ti and Si/Ge/Ga by Al can increase the ionicities of the bonds,thus strengthening the radiation tolerance. It is also shown that there is no obvious difference in radiation tolerance between Mn＋1ACn and Mn＋1ANn due to the similar charge transfer values of C and N atoms. In addition, the improved radiation tolerance from Ti3AlC2 to Ti2AlC （Ti3AlC2 and Ti2AlC have the same chemical elements）, can be understood in terms of the increased Al/TiC layer ratio. Criteria based on the quantified charge transfer can be further used to explore other Mn＋1AXn phases with respect to their radiation tolerance, playing a critical role in choosing appropriate MAX phases before they are subjected to irradiation in experimental test for future nuclear reactors.
基金
supported by the National Natural Science Foundation of China(Grant Nos.91226202 and 91426304)
