期刊文献+

Corrosion Behavior of a Low-Carbon Steel in Simulated Marine Splash Zone 被引量:7

Corrosion Behavior of a Low-Carbon Steel in Simulated Marine Splash Zone
原文传递
导出
摘要 Experiments were designed to simulate the corrosion of a low-carbon steel exposed to a marine splash zone. The composition and morphology of the rust were investigated using Raman spectroscopy, X-ray photoelectron spectroscopy, energy-dispersive spectrometry and scanning electron microscopy. Corrosion resistance of the rust films was demonstrated by the electrochemical impedance spectroscopy. The wettability of the steel surface was calculated from the data conceruing the wetting degree and the conductivity. The results showed that, in the initial stage, the products of the outer rust layer were mainly made up of Fe(Ⅲ) oxyhydroxide, while the main component of the inner rust layer was magnetite. With an increase in the corrosion time, the inner rust layer continuously turned into the outer rust layer. In addition, both rust layers became dense, thus playing a protective role with respect to matrix. The existence of the rust layer significantly prolonged the residence time of the seawater on the sample surface, a result that tends to improve the cathodic protection effect for steel structures exposed to marine splash zones. Experiments were designed to simulate the corrosion of a low-carbon steel exposed to a marine splash zone. The composition and morphology of the rust were investigated using Raman spectroscopy, X-ray photoelectron spectroscopy, energy-dispersive spectrometry and scanning electron microscopy. Corrosion resistance of the rust films was demonstrated by the electrochemical impedance spectroscopy. The wettability of the steel surface was calculated from the data conceruing the wetting degree and the conductivity. The results showed that, in the initial stage, the products of the outer rust layer were mainly made up of Fe(Ⅲ) oxyhydroxide, while the main component of the inner rust layer was magnetite. With an increase in the corrosion time, the inner rust layer continuously turned into the outer rust layer. In addition, both rust layers became dense, thus playing a protective role with respect to matrix. The existence of the rust layer significantly prolonged the residence time of the seawater on the sample surface, a result that tends to improve the cathodic protection effect for steel structures exposed to marine splash zones.
出处 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2017年第6期585-593,共9页 金属学报(英文版)
基金 supported by the National Science Foundation of China(No.41576076) the National Environmental Corrosion Platform(NECP) the National Key Basic Research Program(‘‘973 Program,’’No.2014CB643300)
关键词 Marine splash zone Low-carbon steel Corrosion behavior Electrochemical impedance spectroscopy (EIS) Wetting degree Marine splash zone Low-carbon steel Corrosion behavior Electrochemical impedance spectroscopy (EIS) Wetting degree
  • 相关文献

参考文献1

共引文献32

同被引文献80

引证文献7

二级引证文献28

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部