摘要
5-cell elliptical cavities have been selected for the main linac of the China Accelerator Driven subcritical System （C-ADS） in the medium energy section. According to the design, each cavity should be driven with radio frequency （RF） energy up to 150 kW by a fundamental power coupler （FPC）. As the cavities work with high quality factor and high accelerating gradient, the coupler should keep the cavity from contamination in the assembly procedure. To fulfil the requirements, a single-window coaxial type coupler was designed with the capabilities of handling high RF power, class 10 clean room assembly, and heat load control. This paper presents the coupler design and gives details of RF design, heat load optimization and thermal analysis as well as multipacting simulations. In addition, a primary high power test has been performed and is described in this paper.
5-cell elliptical cavities have been selected for the main linac of the China Accelerator Driven subcritical System （C-ADS） in the medium energy section. According to the design, each cavity should be driven with radio frequency （RF） energy up to 150 kW by a fundamental power coupler （FPC）. As the cavities work with high quality factor and high accelerating gradient, the coupler should keep the cavity from contamination in the assembly procedure. To fulfil the requirements, a single-window coaxial type coupler was designed with the capabilities of handling high RF power, class 10 clean room assembly, and heat load control. This paper presents the coupler design and gives details of RF design, heat load optimization and thermal analysis as well as multipacting simulations. In addition, a primary high power test has been performed and is described in this paper.
基金
Supported by China ADS Project(XDA03020000)
National Natural Science Foundation of China(11475203)
