期刊文献+

双单体接枝PP-g-(NVP-co-PEGMA)改性剂的制备及其表征 被引量:2

Preparation and Characterizations of a Twin-monomer-grafted Polypropylene Modifier
下载PDF
导出
摘要 以聚丙烯(PP)为接枝主链,N-乙烯基吡咯烷酮(NVP)和聚甲基丙烯酸乙二醇酯(PEGMA)为共聚单体,过氧化二异丙苯(DCP)为引发剂,采用熔融接枝法制备了两亲性改性剂PP-g-(NVP-co-PEGMA)。采用元素分析、傅里叶红外光谱、蛋白质吸附实验、水接触角测试对接枝共聚物进行了表征。结果表明,接枝共聚物出现了PEGMA和吡咯烷酮单体单元上羰基(C=O)的振动吸收峰;少量PEGMA的加入提高了NVP的接枝率,比单一的NVP单体提高了5.66%;制得的亲水改性剂聚乙烯吡咯烷酮(PVP)和PEGMA的接枝率分别为21.36%、3.82%;PP-g-(NVP-coPEGMA)具有很好的亲水性,接触角由原来的105°下降至53°;接枝改性剂可以有效地抑制蛋白质的吸附,制得的膜具有良好的抗污染作用。 A twin-monomer-grafted polypropylene(PP)-based modifier was prepared by using Nvinyl pyrrolidone(NVP)and poly(ethylene glycol methacrylate)(PEGMA)as monomers through a melt grafting method.The resulting graft copolymer was characterized by elemental analysis,Fourier-transform infrared(FTIR)spectroscopy,protein adsorption experiment and contact angle test.FTIR analysis indicated that the two monomers were grafted onto PP successfully.The grafting rate of NVP on PP could be improved by the addition of a small amount of PEGMA,and the graft copolymer achieved a grafting rate of 21.36wt%for NVP and 3.82wt%for PEGMA.The graft copolymer exhibited good hydrophilicity,and its water contact angle decreases from 105°to 53°.The graft copolymer also can restrain the adsorption of protein effectively,so the membrane made from this graft copolymer is expected to have a good anti-pollution capability.
出处 《中国塑料》 CSCD 北大核心 2017年第6期100-104,共5页 China Plastics
关键词 聚丙烯 乙烯吡咯烷酮 聚甲基丙烯酸乙二醇酯 接枝率 接触角 polypropylene N-vinyl pyrrolidone poly(ethylene glycol methacrylate) grafting rate water contact angle
  • 相关文献

参考文献4

二级参考文献45

  • 1杨桂成,曾汉民,李家驹.剑麻纤维增强聚氯乙烯复合材料工艺与性能的研究[J].玻璃钢/复合材料,1995(6):22-26. 被引量:17
  • 2杨明山.马来酸酐固相接枝PP的研究[J].塑料工业,1995,23(2):6-9. 被引量:35
  • 3张晓民,汪冬梅,兰淑琴,蒋萌,殷敬华.PP-g-AA的制备和表征[J].高分子材料科学与工程,1996,12(5):26-30. 被引量:18
  • 4俞强,李锦春,夏汉中,刘春林,林明德.聚丙烯反应性挤出接枝马来酸酐的研究[J].江苏石油化工学院学报,1997,9(1):20-26. 被引量:14
  • 5Bucknall C B. Toughened Plastics[M]. London: Applied Science Publishers, 1977.
  • 6Wu S. Generalized Criterion for Rubber Toughening: The Critical Matrix Ligament Thickness[J]. J. Appl. Polym.Sci. Commun 1988,35(2):549-561.
  • 7Wu S. Chain Structure, Phase Morphology, and Toughness Relationships in Polymers and Blends[J]. Polym. Eng. Sci.1990, 30(13): 753-761.
  • 8Wong S C, Mai Y W. Effect of Rubber Functionality on Microstructures and Fracture Toughness of Impactmodified Nylon 6,6/Polypropylene Blends: 1. Structure-property Relationships[J]. Polymer, 1999, 40(6) : 1 553-1 566.
  • 9Lazzeri A, Bucknall C B. Applications of a Dilatational Yielding Model to Rubber-toughened Polymers [ J ]. Polymer, 1995, 36(15) : 2 895- 2 902.
  • 10Van Der Wal A, Mulder J J, Oderkerk J. Polypropylenerubber Blends; 1. The Effect of the Matrix Properties on the Impact Behavimr[J]. Polymer, 1998, 39(26).6 781-6 787.

共引文献23

同被引文献25

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部