摘要
表面润湿性是反映固体材料亲水性的重要指标。采用多因素法,探索冷等离子体处理过程中气体、时间、功率等因素对竹青、竹肉和竹黄表面润湿性的影响,分析竹壁各部位冷等离子体处理的时效性。结果表明:不同气体作为等离子体处理介质,对竹壁各部位平衡接触角的影响各异,影响程度依次为氧气(O_2)>氮气(N_2)>氩气(Ar);竹壁各部位在冷等离子体处理的条件下(氧气作为处理气体、处理时间90 s、处理功率160 w),竹青、竹肉和竹黄对酚醛树脂胶的平衡接触角分别下降61.15%、43.59%和48.32%,竹壁各部位润湿性明显改善;竹壁各部位的氧冷等离子体处理具有时效性,处理后的竹材存放时间最好控制在6 d以内。
Sur!ace wettability is an important indicator ol the hydrophilicity ol solid materials. In this study,the influence ol gas, time and power on the wettability ol bamboo outer skin, bamboo pulp and bamboo inner skin were investigated by multi-lactor method.The activation time ol the cold plasma treatment lor each part ol the bamboo culm was analyzed.The results showed that dillerent gases had dillerent influence on the e-quilibrium contact angle d dillerent parts d bamboo culm and the order d the ellects d the gases was oxygen 〉nitrogen〉argon.The equilibrium contact angles d phenolic resin adhesive to bamboo outer skin,bamboo pulp and bamboo inner skin decreased by 61.1 5 %,43.59% and 48.32% respectively under the cold plasma treat-ment conditions( oxygen as the processing gas, processing time 90 s , processing power 160 w).The wettability ol dillerent parts ol bamboo culm was improved obviously. The ellect ol oxygen cold plasma lor dillerent parts ol bamboo culm hade time limitation and the storage time lor the treated bamboo should not be longer than 6 days.
出处
《江西农业大学学报》
CAS
CSCD
北大核心
2017年第3期535-539,共5页
Acta Agriculturae Universitatis Jiangxiensis
基金
福建省科技重大专项专题(2014NZ0003)~~
关键词
毛竹
冷等离子体
竹壁
接触角
表面时效性
Phyllostachys heterocycla cv pubescens
cold plasma
bamboo culm
contact angle
surlace acti-vation time