摘要
ZJ17卷接机组由于在产品不同规格变换时,需要对设备进行相应的零部件更换、调整。其中烟支切割鼓轮浮圈的调整由于操作空间、调整位置、人员配合、操作方法等原因,耗时较长,精度难以保证,对烟支质量造成影响。为了解决这一问题,设计出多个方案,通过试验、比较,选择出最优方案,制作出一套浮圈调整的定位套、定位块等。安装完成后浮圈调整精度误差在0.2 mm以内,调整时间由原来的25 min降低到1 min左右。通过总结经验,另外对滤嘴切割装置、靠拢鼓浮圈等部位也进行了改进。
When ZJ17 products are changed in different specifications,equipment needs to be replaced and adjusted accordingly. The cigarette cutting drum float adjustment is difficult to ensure accuracy due to the operation space and adjust position, operation methods and other reasons,which is time-consuming and has the impact on the quality of cigarettes. In order to solve this problem,a number of schemes are designed. Through experiments and comparisons, an optimum scheme is selected, and a set of positioning sleeves and positioning blocks for floating rings are made. When the installation is completed, the adjustment error of the floating ring is within 0.2mm,and the adjustment time is reduced from 25 minutes to 1 minutes. By summing up the experience,the filter cutting device, the closer drum, the floating ring and other parts are also improved.
出处
《成都工业学院学报》
2017年第2期38-42,共5页
Journal of Chengdu Technological University
关键词
烟支切割鼓轮
浮圈
定位套
定位块
cigarette cutting drum
floating ring
locating sleeve
locating block