摘要
The microstructure and mechanical properties of low carbon bainite high strength steel plate were studied via different cooling paths at the pilot scale. There was a significant increase in mechanical properties, and notably, the yield strength, tensile strength, and toughness at-40 ℃ for the tested steel processed by ultra-fast cooling were 126 MPa, 98 MPa and 69 J, respectively, in relation to steel processed by accelerated cooling. The ultra-fast cooling rate not only refined the microstructure, precipitates, and martensiteaustenite（M/A） islands, but also contributed to the refinement of microstructure in thick plates. The large size M/A constituents formed at lower cooling rate experienced stress concentration and were potential sites for crack initiation, which led to deterioration of low-temperature impact toughness. In contrast, the acicular ferrite and lath bainite with high fraction of high-angle grain boundaries were formed in steel processed by ultra-fast cooling, which retarded cleavage crack propagation.
The microstructure and mechanical properties of low carbon bainite high strength steel plate were studied via different cooling paths at the pilot scale. There was a significant increase in mechanical properties, and notably, the yield strength, tensile strength, and toughness at-40 ℃ for the tested steel processed by ultra-fast cooling were 126 MPa, 98 MPa and 69 J, respectively, in relation to steel processed by accelerated cooling. The ultra-fast cooling rate not only refined the microstructure, precipitates, and martensiteaustenite（M/A） islands, but also contributed to the refinement of microstructure in thick plates. The large size M/A constituents formed at lower cooling rate experienced stress concentration and were potential sites for crack initiation, which led to deterioration of low-temperature impact toughness. In contrast, the acicular ferrite and lath bainite with high fraction of high-angle grain boundaries were formed in steel processed by ultra-fast cooling, which retarded cleavage crack propagation.
基金
Funded by National Natural Science Foundation of China(No.51234002)
National Key Research and Development Program of China(No.2016YFB0300602)
