2CHUPP, R E, HENDRICKS, R C, LATTIME S B, et al. Sealing in Turbomachinery[J]. Journal of Propulsion and Power, 2006, 22(2): 313-349.
3CHUPP R E, GHASRIPOOR F, TURNQUIST N A, et al. Advanced seals for industrial turbine applications: dynamic seal development [J]. Journal of Propulsion and Power, 2002, 18(6): 1260-1266.
4WITTIG S, DORR L, KIM S. Scaling effects on leakage losses in labyrinth seals [J]. ASME Journal of Engineering for Power, 1983, 105(2): 305-309.
5GAMAL A J M, VANCE J M. Labyrinth seal leakage tests., tooth profile, tooth thickness, and eccentricity effects [J]. ASME Journal of Engineering for Gas Turbines and Power, 2008, 130(1) : 1-11.
6YAN Xin, LI Jun, SONG Liming, et al, Investigations on the discharge and total temperature increase characteristics of the labyrinth seals with honeycomb and smooth lands [J]. ASME Journal of Engineering for Gas Turbines and Power, 2009, 131:1-11.
7WASCHKA W, WITTIG S, KIM S. Influence of high rotational speeds on the heat transfer and discharge coefficients in labyrinth seals [J]. ASME Journal of Turbomachinery, 1992, 114(2): 198-203.
8DENECKE J, DULLENKOPF K, WITTING S, et al. Experimental investigation of the total temperature increase and swirl development in rotating labyrinth seal[C/CD] // Proceedings of the ASME Turbo Expo 2005. New York, USA: ASME, 2005: GT2005- 66677.
9D L Rhode,S R Sobolik.Simulation fo Subsonic Flow Through a Generic Labyrinth Seal[J].Journal of Engineering for Gas Turbines and Power,1986,108:674-680.
10K Kwanka.Dynamic Coeffecients of Stepped Labyrinth Gas Seals[J].Journal of Engineering for Gas Turbines and Power,2000,122:473-477.