期刊文献+

综放工作面供电设计与应用 被引量:1

Design and Application of Power Supply for Fully Mechanized Caving Face
下载PDF
导出
摘要 随着生产规模的扩大,新煤层的勘探,综放工作面的大功率异步电动机使用的越来越广泛,设备起动对电网的冲击也更加明显,根据新采区的实际情况,主要阐述综放工作面在供电设计、电气设备选型及安装过程中分别采用软起动技术、提高供电电压等级,如何对其所需设备及供电线路等进行设计,供电系统中各用电设备的选型及其计算过程,并对其进行整定和校验,设计中比较详细地叙述了矿用电缆及电气设备的选定原则以及井下各种保护装置的选择和整定。本文以我国某煤矿企业为例子,对高产高效综放工作面的供电设计进行了探讨。 With the expansion of production scale and exploration of new coal seam, high power asynchronous motor has been more and more widely used in fully mechanized caving face, and the impact of equipment starting on the power grid is more obvious. According to the actual situation of the new mining area, this paper mainly expounds that in power supply design, selection of electrical equipment and software installation process in the fully mechanized caving face, the soft starting technique is adopted and the voltage level of power supply is increased. The design method of the required equipment and power supply circuits is introduced, and the electrical equipment selection of power supply system and calculation process are also introduced, as well as setting and checking. The principles of selection of mine cables and electrical equipment and the selection and setting of various protective devices in underground are described in detail. In this paper, a coal mine enterprise in China is taken as an example to discuss the design of power supply for high yield and high efficiency fully mechanized caving face.
作者 马荣
出处 《内燃机与配件》 2017年第7期127-129,共3页 Internal Combustion Engine & Parts
关键词 综放 供电设计 容量 保护 fully mechanized top coal caving power supply design capacity protection
  • 相关文献

参考文献10

二级参考文献18

  • 1吕保禄.煤矿企业供电初步设计[J].煤炭技术,2004,23(8):22-23. 被引量:2
  • 2袁维义.电气控制[M].北京:化学工业出版社,2002.
  • 3安顺合.电气设备安全运行[M].北京:化学工业出版社,1999.
  • 4方承远.电气控制技术[M].北京:机械工业出版社,2000.
  • 5高亚军.浅谈采煤工作面的供电.科协论坛,2007,(11):13-15.
  • 6张步涵 李可文 沙立华 等.基于树状网络潮流的供电线路电能损耗计算.华中理工大学学报,2009,28(2):28-60.
  • 7章长东.工业与民用电气安全[M].北京:中国电力出版社,1990..
  • 8GB 50052-1995.供配电系统设计规范[S],1995.
  • 9刘成君,杨仁刚.变压器谐波损耗的计算与分析[J].电力系统保护与控制,2008,36(13):33-36. 被引量:57
  • 10王育槐,焦瑾.配电变压器低压侧互联以降低配电网线损率[J].电力系统自动化,2008,32(16):103-106. 被引量:18

共引文献28

同被引文献4

引证文献1

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部