摘要
以铝合金Al6061-T6为研究对象,采用单因素试验方法,利用MIKRON UCP800五轴联动加工中心进行了微铣槽试验,研究了主轴转速、切削深度和进给速度对顶部毛刺尺寸的影响,初步揭示了上述切削参数对顶部毛刺尺寸的影响规律,为主动控制微铣加工过程中的毛刺尺寸提供依据。
Burr formed during micro-slot milling has the most direct effect on surface quality and dimension accuracy of workpiece. Compared with other burrs, top burr having the biggest dimension makes subsequent deburring operation more difficult. To analyze the effect of spindle speed, cutting depth and feeding speed on top burr size, A16061-T6 used as research object conducted on a 5-axis machining center with the single factor method. Effect regularities of process parameters on burr dimension are preliminarily revealed, active control of burr dimension during micro-slot milling operation could be possible based on this experiment.
出处
《工具技术》
北大核心
2017年第7期56-59,共4页
Tool Engineering
基金
国家自然科学基金(51075192)
关键词
微铣削
顶部毛刺
切削参数
micro-milling
top burr
cutting parameters
basic rule
