期刊文献+

加载频率对FV520B-I钢超高周疲劳性能的影响 被引量:1

Effect of Loading Frequency on Fatigue Property of FV520B-I Steel in Super High Cycle Regime
下载PDF
导出
摘要 采用超声疲劳试验方法和常规疲劳试验方法,对FV520B-I钢在20kHz和140 Hz频率下的超高周疲劳性能进行了研究,分析了加载频率对FV520B-I钢超高周疲劳性能的影响,并基于Basquin方程对超声疲劳试验数据进行了修正。结果表明:在应力幅值相同的情况下,试验钢的疲劳寿命随加载频率的提高而增加,而疲劳强度随加载频率的提高而降低;常规疲劳试验和超声疲劳试验下试验钢的疲劳断裂机制和断口形貌基本相同;修正后的超声疲劳试验数据与常规疲劳试验数据具有较好的相容性。 The super high cycle fatigue property of FV520B-I steel was studied by ultrasonic and conventional fatigue test method with frequency of 20 kHz and 140 Hz,respectively.The influence of loading frequency on super high cycle fatigue property of FV520B-I steel was investigated,and the ultrasonic fatigue testing data was corrected based on Basquin formula.The results show that the fatigue life of FV520B-I steel increased with increase of loading frequency when stress amplitude was the same,while fatigue strength was decreased.The fatigue fracture mechanism and fracture morphology of FV520B-I steel in ultrasonic fatigue test were almost the same with that in conventional fatigue test.The corrected ultrasonic fatigue test data had a good compatibility with conventional fatigue test data.
出处 《机械工程材料》 CSCD 北大核心 2017年第7期66-69,75,共5页 Materials For Mechanical Engineering
基金 国家重点基础研究发展计划项目(2011CB013400) 国家自然科学基金资助项目(51475077)
关键词 FV520B-I钢 超高周疲劳 加载频率 数据修正 FV520B-I steel super high cycle fatigue loading frequency data correction
  • 相关文献

参考文献4

二级参考文献27

  • 1薛红前,陶华,C.BATHIAS.超声疲劳试样设计[J].航空学报,2004,25(4):425-428. 被引量:28
  • 2ASTM STP1231- 1994. An automatic ultrasonic fatigue testing system for studying low crack growth at room and high temperature [S].
  • 3WANG Q Y, BERARD J, RATHERY Y, et al. High cycle fatigue crack initiation and propagation behaviour of high cycle spring steel wires [J].Fatigue Fract Eng Mater Struct, 1999, 22 (8) :673--677.
  • 4BATHIAS C. How and why the fatigue S-N curve does not approach a horizontal asymptote[J]. International Journal of Fatigue, 2001, 23 (1):143--151.
  • 5MAYER H, PAPAKYRIACON M, ZETTL B, et al. Influence of porosity on the fatigue limit of die cast magnesium and aluminium alloys [J]. International Journal of Fatigue, 200a, (25) : 245 --256.
  • 6BAYRAKTAR E, BATHIAS C, XUE H, et al. On the giga cycle fatigue behaviour of two phase (α2 +γ) TiAI alloy [J]. International Journal of Fatigue, 2005, (12):1263--1275.
  • 7JIANG L, WANG H, LIAW P K. Characterization of the temperature evolution during high-cycle fatigue of the ULTIMET super alloy, experiment and theoretical modeling[J]. Metal Mater Trans, 2001,32A:2279--2296.
  • 8ASTM STP 378-- 1964. Internal friction, damping, and cyclic plasticity [S].
  • 9PUSKAR A. The thermal activation of cumulative fatigue damage at ultrasonic frequencies [J]. Ultrasonics, 1977,(5):124-128.
  • 10PARIS P. The relationship of effective stress intensity, elastic modulus and burger-vector on fatigue crack growth as associated with "fish eye" gigacycle fatigue phenomena [A]. Proceeding on the VHCF-3[C]. Kyoto: 2004. 1--13.

共引文献33

同被引文献4

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部