期刊文献+

溶液法反式-1,4-聚异戊二烯/天然橡胶共混胶的性能 被引量:3

Properties of solution-polymerized trans-1,4-polyisoprene/natural rubber blends
下载PDF
导出
摘要 研究了用负载钛催化剂、通过溶液聚合法合成的高纯度反式-1,4-聚异戊二烯(TPI)与天然橡胶(NR)共混胶的硫化特性、力学性能、老化性能以及动态疲劳性能。结果表明,与NR相比,TPI与NR质量比为20/80共混胶的门尼黏度稍高,硫化特性基本相当,力学性能略有下降,而其动态疲劳性能则提高至NR的3~4倍。当硫黄与促进剂M的质量比为2.5/1.0时,TPI/NR共混胶的综合性能达到最佳。 The curing characteristics, mechanical properties, aging properties and dynamic fatigue properties of the blend of highly pure trans-1,4-poly- isoprene (TPI) synthesized by solution polymerization with supported titanium catalyst and natural rub- ber (NR) were studied. The results showed that the Mooney viscosity of the TPI/NR blends (mass ratio 20/80) was slightly higher compared with NR, the curing characteristics was similar to NR, the mechanical properties decreased slightly compared with NR, and the dynamic fatigue property was 3 - 4 times as high as NR. When the mass ratio of sulfur to accelerator M was 2.5/1.0, the comprehensive performance of the blend was the best.
出处 《合成橡胶工业》 CAS CSCD 北大核心 2017年第4期291-295,共5页 China Synthetic Rubber Industry
关键词 反式-1 4-聚异戊二烯 天然橡胶 溶液法 共混物 力学性能 动态疲劳性能 trans-1,4-polyisoprene natural rubber solution method blend mechanical property dynamic fatigue property
  • 相关文献

参考文献7

二级参考文献53

  • 1贺继东,宋景社,黄宝琛.反式1,4聚异戊二烯的合成、结构与性能[J].青岛化工学院学报(自然科学版),1995,17(3):288-296. 被引量:12
  • 2贺继东,黄宝琛,姜峰,郑建众,唐学明.用TiCl_4/MgCl_2-Al(i-Bu)_3合成反-1,4-聚异戊二烯[J].合成橡胶工业,1996,19(1):37-39. 被引量:6
  • 3黄良平,杨军,王付胜,李旭东.TPI与CR并用胶性能的研究[J].橡胶工业,2006,53(5):294-296. 被引量:8
  • 4[1]Lake G J.Mechanical fatigue of rubber[J].Rubber Chemistry and Technology,1972,45 (1):309.
  • 5[2]Young.D.G.Fatigue crack propagation in elastomer compound[J].Rubber Chemistry and Technology,1982,55 (4):428.
  • 6[3]Wang M J.Effect of polymer-filler and filler-filler interactions on dynamic properties of filled vulcanizates[J].Rubber Chemistry and Technology,1996,71:520~585.
  • 7[4]Freund B,Forster F.Low rolling resistance tread compounds[J].Kauts.Gummi.Kunstst,1996,49(11):774~784.
  • 8[8]J.G.Williams.Fracture mechanics of polymers[M].New York:ELLIS HORWOOD LIMITED,1984,168~174.
  • 9[9]Andrews,E.H.Fracture in polymers[M].London:Olives and Boyol; 1968,151.
  • 10[10]Rivlin R S.Rupture characteristic of rubber for tearing energy[J].Polymer Science,1953,10 (3):291.

共引文献90

同被引文献26

引证文献3

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部