期刊文献+

长庆油田集输管道检测与完整性评价系统 被引量:6

Inspection and Integrity Evaluation System of the Gathering and Transportation Pipeline in Changqing Oilfield
下载PDF
导出
摘要 建立管道完整性评价系统的目的在于加强管道的风险识别评估,对管道事故进行有效预防与控制。该系统基于管道失效数据模型,并与管道运行环境空间地理信息的完整性评价软件平台相结合,包含管道腐蚀评价、失效评价、安全运行评价、风险识别、高后果区分析等功能。采用适用于长庆油田不同管径规格的含水油管线内腐蚀检测方法得到的数据结果及各管道个体特征数据作为数据基础,并通过对不断变化的系统性风险因素进行评价与挖掘分析,对相应评估体系、模型数据进行持续地自动优化与修正,建立一个动态、循环、不断优化的管道风险评价体系,为管道的安全运行、计划修复、管线更换提供决策依据。 The purpose of establishing pipeline integrity evaluation system is to strengthen the pipeline risk identification evaluation, effective prevention and control of pipeline accidents. The system is based on the model of pipeline failure data and is combined with the integrity of pipeline operation environment space geographic information evaluation software platform,containing the corrosion evaluation of pipeline, failure evaluation, safe operation evaluation, risk identification, heavy consequence area analysis,etc.Its data is based on data results got from internal corrosion detection methods on different specification oil pipelines in Oilfield and pipeline individual characteristic data. Meanwhile, through evaluating and analyzing systematic risk factors that are continuous changing, the corresponding evaluation system and data model are continuously and automatically optimized and corrected, building a pipeline risk evaluation system that is dynamic, cyclic and constantly optimizing, and can provide decision basis for the safe operation,repair plan and pipeline replacement of the pipeline.
作者 陈琛
出处 《油气田地面工程》 2017年第7期71-74,共4页 Oil-Gas Field Surface Engineering
关键词 长庆油田 管道内腐蚀检测 管道失效模型 管道完整性评价 ChangqingOifield pipelineinternalcorrosioninspection pipeline failure model pipelineintegrity evaluation
  • 相关文献

参考文献4

二级参考文献41

  • 1赵新伟,罗金恒,李鹤林,杨龙.油气输送用焊接钢管可靠性评估方法[J].中国安全科学学报,2004,14(9):7-10. 被引量:9
  • 2Luo Jinheng, Zhao Xinwei, Xiong Qingren, et al. Defective Pipeline Fatigue-life Prediction using Fatigue Assessment Diagram Technique. The Proceedings of IPC2004[C]. Calgary, Canada, 2004.
  • 3Maxey, W A, Kiefner, J F, Eiber R J, et al. Ductile Fracture Initiation, Propagation and Arrest in Cylindrical Vessels. Fracture Toughness[R]. ASIM STP514. Philadelphia:ASIM, 1972 : 70 - 81.
  • 4NSI/ASME B31G:Manual for Determining the Remaining Strength of Corroded Pipelines[S], 1991.
  • 5CAN/EBA Z184 - M86 - 1986 Gas Pipeline Systems[S].Ottawa.CSA, 1986.
  • 6DNV RP F101 - 1999 Corroded Pipelines[S]. Oslo. DNV, 1999.
  • 7API 579.Recommended Practice for Fitness-for-service[S], 2000.
  • 8Kumar V, German M D, Shih C F. An Engineering Approach for Elastic-plastic Fracture Analysis[R].EPRI NP- 193. Palo Alto. EPRI, 1981.
  • 9I. Milne, R.A. Ainsworth, A.R.Dowling and A.T. Stewart, Assessment of the Integrity of Structures Containing Defects-CEGB Report R/H/R6-Rev. 3[J]. Int. J. Press. Vess. and Piping. 1988, 32: 3 - 104.
  • 10ASEM XI IWB - 3640 and Appendix H: Flaw Evaluation Procedures and Acceptance Criteria for Austenic piping[S], 1986.

共引文献143

同被引文献39

引证文献6

二级引证文献16

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部