摘要
利用Airpak软件,结合某高层办公楼,对布置在建筑凹槽内的空气源多联机室外机热环境特性进行模拟。根据模拟结果及分析,对原始空调方案进行优化设计,提出3个优化方案。通过综合对比和分析3个方案的可行性及优劣势,对各方案在实际办公建筑中的适用性提出相应的建议,供同行参考。
Based on door unit of air-source one high-rise office building, the thermal environment for the out- multi-connected air-condition unit placed on the building groove is simulated using Airpak software. According to the results and analysis of the simulation, the original design scheme of air-conditioning is optimized so that three optimization schemes are put forward. Through comprehensive comparison and analysis on the feasibil- ities, strengths and weakness among these three optimization schemes, corresponding ad- vices for each scheme applied to actual office buildings are put forward, which provides references for other designers.
作者
资晓琦
吴少光
Zi Xiaoqi Wu Shaoguang(Zhubo Design Group Co., Ltd)
出处
《制冷与空调》
2017年第7期59-64,37,共7页
Refrigeration and Air-Conditioning
关键词
空气源热泵(冷水)机组
多联机
室外机
建筑凹槽
优化设计
模拟
air-source heat pump (water chilling) packages
multi-connected air-condi-tion unit
outdoor unit
building groove
optimization design
simulation