期刊文献+

煤炭不同研磨时间对检测结果的影响研究

Studies Effect of Grinding Time on Coal-analysis Result
下载PDF
导出
摘要 为研究一般分析试验煤样0.2 mm筛上物比率对检测结果的影响,选取了5个具有代表性的煤样进行了试验。实验结果表明:不同煤种完全通过0.2 mm筛的研磨时间是不一样,用于检测用的一般分析试验煤样,样品粒度全部小于0.2 mm时检测结果有更好的重复性和代表性,开展煤质检测的机构或部门应针对煤种及磨粉设备进行粒度分析,确定最佳磨粉时间,保证样品检测的准确性。 In order to studies screen overflow of ratio general analysis test sample of coal on the coalanalysis result, five different coals were used to test. Results of the trial indicated that all particles of different coal pass 0.2 mm sieves takes differing amounts of time to grind, it could satisfy the requirement of coal quality analysis when the particle size of sample was less than 0.2 mm, the agency of coal quality testing need to analysis the grain size of general analysis test sample of coal, ensure sample testing accuracy.
出处 《煤炭技术》 北大核心 2017年第8期294-296,共3页 Coal Technology
关键词 研磨时间 筛上物比率 煤质分析 grinding time screen overflow of ratio coal-analysis
  • 相关文献

参考文献2

二级参考文献1

  • 1段云龙.煤炭试验方法标准及其说明[M].北京:中国标准出版社,1991.232-238,536-537.

共引文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部