期刊文献+

Gradient Structured Copper by Rotationally Accelerated Shot Peening 被引量:17

Gradient Structured Copper by Rotationally Accelerated Shot Peening
原文传递
导出
摘要 A new technology-rotationally accelerated shot peening(RASP), was developed to prepare gradient structured materials. By using centrifugal acceleration principle and large steel balls, the RASP technology can produce much higher impact energy compared to conventional shot peening. As a proof-of-concept demonstration, the RASP was utilized to refine the surface layer in pure copper(Cu) with an average grain size of 85 nm. The grain size increases largely from surface downwards the bulk, forming an800 ?m thick gradient-structured surface layer and consequently a micro-hardness gradient. The difference between the RASP technology and other established techniques in preparing gradient structured materials is discussed. The RASP technology exhibits a promoting future for large-scale manufacturing of gradient materials. A new technology-rotationally accelerated shot peening(RASP), was developed to prepare gradient structured materials. By using centrifugal acceleration principle and large steel balls, the RASP technology can produce much higher impact energy compared to conventional shot peening. As a proof-of-concept demonstration, the RASP was utilized to refine the surface layer in pure copper(Cu) with an average grain size of 85 nm. The grain size increases largely from surface downwards the bulk, forming an800 ?m thick gradient-structured surface layer and consequently a micro-hardness gradient. The difference between the RASP technology and other established techniques in preparing gradient structured materials is discussed. The RASP technology exhibits a promoting future for large-scale manufacturing of gradient materials.
作者 X.Wang Y.S.Li Q.Z.ang Y.H.Zhao Y.T.Zhu X.Wang;Y.S.Li;Q.Z.ang;Y.H.Zhao;Y.T.Zhu(Nano Structural Materials Center, School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695, USA)
出处 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2017年第7期758-761,共4页 材料科学技术(英文版)
基金 supports from the National Natural Science Foundation of China (Grant No. 51301092) Pangu Foundation are acknowledged
关键词 Microstructure Rotationally accelerated shot peening Gradient structure Hardness Copper Microstructure Rotationally accelerated shot peening Gradient structure Hardness Copper
  • 相关文献

同被引文献108

引证文献17

二级引证文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部